Catalogue - Product Information - TAKASAGO ELECTRIC, INC. - (Version JPG)

TAKASAGO ELECTRIC, INC.

Variety of Other Products - Pinch Va lve, Air-Operated Valve and Others

Pinch Valve series

Air Operated Valves

Tube Fittings

flange type

flare typa


	© PË series	© PS series	© PM series	© PK series	© NP series	© EPK series		O PDT	© PMDT

Dimensions (mm)	<S> 14 X H 55.1	9 20 X H 49.5	« 26 x H 57.2	W 40 X L 36 X H 65 ~ 82.5	W40 XL36 X H 65 ~ 82.5	« 64 X H 82.5 -IIS	Dimensions (mm)	9 44.5 x H 52-67	« 25 x H 42 ~ 49
				W 40 X L 36 X H 65 ~ 82.5	W40 XL36 X H 65 ~ 82.5
Tubs Material	Silicone	Silicone. PharMeda	Silicone. PharMeds	Silicone	Silicone	Silicone	Orifico Diameter (mm)	«3-5	« 2
Tube	« 0.8 X » £.4	»1X03	» O.S X * 2.4	« 3 x « 5	« 3 x * 5	* 10 x « 13	Port Connection (or body	Rcl/8,Rcl/4	M6,l/4-28UNF.Barb
Dlameter(mm)		4 1.6X« 3.2	0 1X03	<t> 6 X (t 8	* 6 x * 8	* 15 X * 19	Operating Pressure	0-300kPa	-90 - 500kPa
Pressure	0~ lOOkPa	0- ISOkPa	0~ 150kPa	0~50kPa	0~50kPa	0~50kPa	Air Pressure for	300 - 600kPa	300 ~ SOOkPa
Voltage	DC12V.DC24V	DC12V.DC24V	DC12V.DC24V.AC100V	DC12V,DC24V,AC100V	DC12V,DCa4V,AC10CV	DC12V.DC24V.A0100V	actuation	300 - 600kPa	300 ~ SOOkPa
Voltage	DC12V.DC24V	DC12V.DC24V	DC12V.DC24V.AC100V	DC12V,DC24V,AC100V	DC12V,DCa4V,AC10CV	DC12V.DC24V.A0100V	Port Connection for elr pressure
ftwrConairnption	2.8W	3W	4.4W	10W	10W	60W (irrosmttHnt 5 minutes)	Port Connection for elr pressure	Rcl/8	M5.M6, 1/4-28UNF

We have three types of fittings.

■ A flange type is used for tubing made of piastic like PTFE, and has a simple structure. Before use. the tube end should be enlarged like a trumpet and pushed into the bottom of a valve port (Figure 1).

■ With flare types, a ferrule called a "Seal Joint' Is attached for easy connection (Figure 2). The Seal Joint Is a component molded In a flange shape. Simply insert the Seal Joint Into the end of the tube for use.

■ For elastic tubing such as silicone, barb types are very convenient (see the picture on your right-hand side). Screw fittings into the valve ports beforehand and then connect tubing to the barb section of the fitting.

PharMed® Is a trademark of Saint Gobain Performance Plastics.

Manifolds

Latching solenoid

If you would like to install valves compactly and connect flow-paths over a short distance, the Manifold is the best choice. If you let us know the flow-pattern you require, we can design and produce the product to meet your requirements, A variety of shapes, materials, and structural methods are available and we are also capable of equipping the manifold with components like pumps. Please contact us for further details.

With normal solenoid vaives. for example a normally-closed valve, the solenoid valve should be continuously energized to hold it open. With the latching solenoid valve, you do not have to continuously supply electricity to the coil as it uses a permanent magnet to keep the valve's position (either open or closed). The advantages are as follows:

[1] Environmentally friendly, energy-saving

No need to be energized to hold the position, resulting In a saving of energy. (Note) Switching positions needs the valve to be energized.

[2] Less heat generation

As continuous energization is unnecessary, the latching solenoid valve generates less heat. It is suitable for temperature-sensitive applications.

[3] Small but powerful

A normal solenoid can consume large amounts of electricity, therefore to prevent the coil from overtieating it is necessary to Increase the size of the coil to reduce the heat-generation, or to decrease the amount of time it Is energized. The latching solenoid produces greater power compared to Its size and for the length of time it Is energized. This enables us to offer a small valve that Is powerful and independent from the open/oiose time.

Product Information - TAKASAGO ELECTRIC, INC. - #5

Syringe pump, Transfer pump, Peristaltic pump, Micro pump, Solenoid pinch valve