| | | •ft*^Ä4dBm (Class2) • Bluetooth9 standard Ver.2.0+EDRlIliElxfi — Bluetooth ACL links, Piconet<7>, Scatternet <2.5>, Hold, Sniff, Park, AFH & Coexistence, Faster connection, EDR Selective Suspend, Dual Boot. ■<>J-7i<X: USB • 7°Ph=UUX$-;/7: HCl firmwarejyT • 31 x 15X3 mm •RoHS (2002/95/EC)*№ QDID : B012537 | | • The module is a Max.4dBm (Class2) module. • Bluetooth9 standard Ver.2.0+EDR. • Support functions. — Bluetooth. ACL links, Piconet<7>, Scatternet <2.5>, Hold, Sniff, Park, AFH & Coexistence, Faster connection, EDR. —Others. Selective Suspend, Dual Boot. • Interface : USB. • Protocol stack : Under HCI firmware. •Outline : 31 X15 X3 mm. • RoHS (2002/95/EC)Available. QDID : B012537 | | |
| | | | | | | | | | | | | | Parameter | Description | Min. | Typ. | Max. | Units | | | | Carrier Frequency | | 2.402 | | 2.480 | GHz | | | | Operating Voltage (VDD) | USB Interface | 3.15 | 3.3 | 3.45 | V | | | | RF Output Power | Measured in 50 ohm | -6 | 0 | 4 | dBm | | | | RX Sensitivity | | - | -83 | -70 | dBm | | | | Load Impedance | No abnormal Oscillation | - | | 5:1 | - | | | | Input Low Voltage | /RESET, PIOX | -0.3 | | 0.8 | V | | | | Input Low Voltage | USB D+, USB D- | - | | 0.8 | V | | | | Input High Voltage | /RESET, PIOX | 0.7XVDD | | VDD+0.3 | V | | | | Input High Voltage | USB D+, USB D- | 2.0 | | - | V | | | | Output Low Voltage | PIOX | - | | 0.4 | V | | | | Output Low Voltage | USB_D+, USB_D- | - | | 0.3 | V | | | | Output High Voltage | PIOX | 0.8XVDD | | - | V | | | | Output High Voltage | USB_D+, USB_D- | 2.8 | | - | V | | | | Average Current Consumption | Receive DM1 | - | 43 | - | mA | | | | | | | | | | | | | |
| | | B/uef<x>«i®7-Kv--?tn=rtt, Bluetooth SIG,lnc.#'jfi;frl.T*5U, 7<t>XC*^#*iStftiêa?«HLT^ir. BluetoothW^WB®, *Stt^*©ffitfCI^ttc Note : The above PRELIMINARY data are not guaranteed and are subject to change without notice. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. | | |