Agitators
12Pages

{{requestButtons}}

Catalog excerpts

Agitators - 2

TACMINA Agitators for All Agitation and Mixing Needs Manufacturing processes not only in the food and chemical industries but also in all sectors of industry are diversifying. Agitators are now required to immediately meet varying on-site conditions. TACMINA's range of agitators has been further enhanced to cover agitation of liquids, slurry, kneaders, static mixers, and other related equipment. Select the ideal model to suit your on-side requirements as if you are ordering a custom-made machine Fat industry Heating, mixing, extraction, reaction, storage, etc. Rubber industry Suspension...

Open the catalog to page 2
Agitators - 3

Select from three types - vertical, portable, horizontal - to suit pre- and post-manufacturing processes and itators agitators is a long service life and little fixed at the top part of tanks, and their shafts are inserted vertically for use. Two features of these vibration. For medium speeds For medium/low speeds (gear reducer type) (geared motor reducer type) \_ For medium/low speeds (cycloid reducer type) C1T (for processes) For medium/low speeds (cycloid reducer type) C2T (for water treatment and general use) For medium speeds (belt reducer type) BT Variable Speed Model (custom order)...

Open the catalog to page 3
Agitators - 4

When selecting the type of agitator and motor drive, it is important that you fully understand specifications and operating conditions. Your dealer will select the ideal agitator model matched to your particular requirements for you. Check each of the following items, fill in the table on the rear of this catalog, and inform your dealer of this information. Agitation Force Check your particular agitation requirements and physical conditions of the liquid you are going to agitate before checking the agitation force. Motor Drive Confirm that the motor drive matches the volume of liquid....

Open the catalog to page 4
Agitators - 5

Impeller Selection of the optimum impeller shape is vital. (Your dealer will select the impeller matched to your specifications.) Vane shape Disk turbine 2-vane paddle Anchor spiral ribbon Standard Specifications3-vane propeller Paddles This axial flow propeller is the most widely used to obtain a large circulation volume. 4-45° paddle This paddle produces a high agitation effect flow by the combined action of radial flow and axial flow. It is ideal for agitation of large volumes of comparatively high-viscosity liquids, (500 to 20000mpA^s) liquids at slow speeds, and is used at rotation...

Open the catalog to page 5
Agitators - 6

Vertical type Mounting procedure for vertical agitators In this example, the agitator is mounted eccentrically in the tank to obtain vertical convection and turbulence in the direction of axial flow. In this example, the agitator is mounted at the center of the tank, and baffle plates are attached on the inner wall of the tank to create vertical convection and turbulence. For medium speeds (gear reducer type) As this vertical agitator is a highprecision gear unit, it emits little sound during operation, is compact, and demonstrates high performance. For medium/low speeds (geared motor...

Open the catalog to page 6
Agitators - 7

0.4 kW or more for 6-pole motor (customer order). Also, body, shaft diameter and Specification Dimensions propeller diameter dimensions increase by one more rank. External Dimensions • The 2-stage, 3-vane propeller is optional. • Idling is prohibited. • The standard paint color is Munsell 10GY-6/6. • The standard liquid-end materials are SUS304 and SUS316. Linings are also available in various materials. • The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type. • Sealed type (BTP) is also available. For details,contact your TACMINA representative. * Up to 0.75 kW, 1 stage,...

Open the catalog to page 7
Agitators - 8

Mounting procedure for portable agitators For medium speeds (gear reducer type) As this portable agitator is a high-precision gear unit, it emits little sound during operation, is compact, and demonstrates high performance. This handy multi-type model can also be used as a vertical type (GT model) if the clamp is removed and a flange is attached. The agitator is clamped to the support base or top edge of the tank. Though the shaft is mounted at an angle with respect to the horizontal and vertical directions, it should be fixed so that its vanes do not exceed beyond the center of the tank....

Open the catalog to page 8
Agitators - 9

External Dimensions When outdoor cover is attached Specification Dimensions Model Motor Revolution Output Voltage Speed (min-1) V 5 kW 0Hz 6 0Hz 0.4 kW or more for 6-pole motor (customer order). Also, body, shaft diameter and propeller diameter specifications increase by one more rank. Agitation Shaft 3-vane propeller Standard Dia. 1st stage 2nd stage dia dia. length (L) (Dia. D) (A) Part Dimensions Max. Agitation Capacity Approx. Weight Diluted Medium W/ motor Viscosity Liquid kg L mm mm mm mm 1 0 3 51 7 5 2 6 0 60 1 0 2 2 0 -4 1 1 3 4 0 8 7 40 10 3 10 0 0 6 GS - 0.065A 0.0 5 1 0 80 1 0 0...

Open the catalog to page 9
Agitators - 10

Chemical dissolving tank with metering pump and base for agitator Solution Tank Features In addition to standalone use, this tank can be used in various combinations for various applications: with a metering pump, with an agitator, or with a metering pump and agitator. An extensive range of range sizes are available: 50, 100, 200, 300, 500 and 1000 liters. Agitator for Solution Tank CS Features Compact. Ideal for small volumes Combining with Solution Tank fully demonstrates performance. Specification Dimensions Model • Idling is prohibited. • The standard paint color is Munsell 10GY-6/6. •...

Open the catalog to page 10
Agitators - 11

Noritake Static Mixers with No Driven Parts For reduced maintenance and energy and space savings in mixing processes Sanitary Finishing Type N30 Series This sanitary type conforms to the same standards for sanitary piping used in food processing plants and supports CIP cleaning. The main unit and element can be easily removed and attached, making it ideal for processes that require disassembly for cleaning. Notify us of the following when inquiring about TACMINA agitators. Specifications N10 Series N60 Series Both ends of the element are welded to the housing, with six elements provided for...

Open the catalog to page 11

All TACMINA CORPORATION catalogs and technical brochures

  1. PL series

    16 Pages

  2. V Seres

    4 Pages