• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

Model WX1284/WX2184 1.25GS/s or 2.3GS/s Four Channel Arbitrary Waveform Generator - 5 Pages

Add to MyDirectIndustry favorites
Model WX1284/WX2184 1.25GS/s or 2.3GS/s Four Channel Arbitrary Waveform Generator
  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

Catalogue excerpts

1.25GS/S or 2.3GS/S, Four Channel 14 Bit waveform generator Programmable inter-channel control with 5ps resolution Up to 1GHz sine and 500MHz square waves 16M waveform memory, 32M memory optional 2 selectable output paths: • 2Vp-p into 50Q with 700MHz bandwidth, Differential DC output • 4Vp-p into 50Q with 350MHz bandwidth, Differential DC output AM, FM, FSK, PSK, ASK, Amp. Hop, Freq. Hop, Sweep & Chirp Powerful pulse composer for analog, digital and mixed signals Arbitrary Waveform Generators • Eight programmable markers • Advanced sequencer for step, loop, nest and jumps scenarios • Smart trigger allows: trigger hold-off, detect <=> pulse width, as well as wait-for-waveform-end or abort waveform and restart • Two instrument synchronization to form a 8-channel system • User friendly 4" color LCD display • Remote control through LAN, USB and GPIB • Store/recall capability on disk-on-key or 4GB internal memory (2.3GS/s) are four channel arbitrary waveform generators, which offer unrivaled performance, in unmatched case size and cost, without compromising bandwidth and signal integrity. Using the very same 12.5" width, 2U height box as the single and dual channel versions of the WX series, the four channel additions provide more channel density for high-speed AWG than ever revealed before in a benchtop, allowing customers to shrink, even further, their bench or system space. Universal Waveform Source Aside from its natural ability to generate arbitrary shapes with waveform granularity of 1 point, the WX series can also be used as a full-featured standard, modulation or pulse/ pattern generator to solve various applications. Equipped with up to 2.3GS/S, Mbit clock and up to 32Mpoints memory, the WX series can generate literally any waveform, short or long, at frequencies up to 1GHz with 8 digits of resolution, resulting in the highest precision signal creation and regeneration without compromising signal fidelity or system integrity. Signal Integrity and Purity One of the most important requirement in today's testing and measurement applications is high signal quality. With a typical SSB phase noise of <-115dBc at carrier offset and with exceptionally good SFDR of <-70dBc at 1GHz carrier, Tabor's WX series unique platform delivers one of the best quality signals available on the market today, answering the ever-growing demand for clear and precise signals. Common or Separate Clocks The new four channel architecture offers two SCLK sources, enabling users to choose between a common or separate SCLK feed. A common SCLK source allows for all outputs to be fully synchronized with 5ps of skew control for accurate and controlled phase between channels, ideal for many X- Y modes, l&Q output and even 4 channel MIMO link applications. Alternatively, users can select to work with two separate SCLK sources resulting in two separate channel couples (1&2 and 3&4) with each having the ability to be programmed to output different function shapes, frequency, amplitude levels and/or to operate in different run modes, in effect having two separate dual channel Have a requirement for different output paths in your lab? Great! The new four channels additions to the WX series offer two single or differential ended DC coupled output amplifiers: 2Vp-p into 50Q with 700MHz bandwidth, for applications demanding optimized transitions and aberrations or 4Vp-p into 50Q with 350MHz bandwidth, for applications demanding high voltage. Visit our website at www.taborelec.com

 Open the catalogue to page 1

MODELS WX1284/WX2184 1.25GS/s or 2.3GS/s Four Channel Arbitrary Waveform Generators Powerful Segmentation and Sequencing Solving almost every complex application, powerful segmentation and sequencing produces a nearly endless variety of complex waveforms. The waveform memory can be divided into multiple waveform segments and sequenced in user-selectable fashion to create complex waveforms that have repeatable segments, jump and nest, saving you precious memory space. The WX series also allows you to generate up to 1000 sequence scenarios and sequence between them to generate an even higher level...

 Open the catalogue to page 2

Output Channels 4, Synchronized/semi separated STANDARD WAVEFORMS Frequency Range: Square, Pulse Sine, triangle, square, ramp pulse, sin(x)/x, exponential rise, exponential decay, ] Measured with 500MHz lowpass titer '2) Measured with 1 GHz lowpass titer SSB Phase Noise (10kHz offset): Pulse Mode: Pulse Width: Single or double, programmable Normal, inverted or complement Rise/Fall Time: Delay, Double Pulse Delay: High Level 1. All pulse parameters, except rise and fall times may be freely programmed within the selected pulse period provided that the ratio between the period and the smallest incremental...

 Open the catalogue to page 3

Dwell Time Mode: Dwell Time: Fixed or programmable per step SWEEP /CHIRP Sweep Type: Linear or log Sweep Direction: Up or down Modulation Shape: Pulse Pulse Repetition: Modulation Shape: Sine, square, triangle, ramp ASK/AMPLITUDE HOPPING Dwell Time Mode: Dwell Time: Fixed or programmable per step Modulation Type: PSK, BPSK, QPSK, OQPSK, Carrier Control: On/Off Symbol Rate Range: COMMON CHARACTERISTICS Accuracy/Stability: Same as reference ACCURACY REFERENCE CLOCK aging rate External Same as accuracy and MAIN OUTPUTS Front panel SMAs 50Q nominal, each output Protected against temporary short to...

 Open the catalogue to page 4

MODELS WX1284/WX2184 1.25GS/s or 2.3GS/s Four Channel Arbitrary Waveform Generators Specication RUN MODES Continuous: Self Armed: Armed: Triggered: Normal Mode Override Mode: Gated: Burst: A selected output function shape is output continuously. No start commands are required to generate waveforms. The output dwells on a DC level and waits for an enable command and then the output waveform is output continuously; An abort command turns off the waveform. A trigger signal activates a single-shot or counted burst of output waveforms and then the instrument waits for the next trigger signal. The rst...

 Open the catalogue to page 5

All Tabor Electronics catalogues and technical brochures

  1. MODELS SE5081/2

    5 Pages

  2. MODELS 52591/2

    5 Pages

  3. WX1281B

    5 Pages

  4. WW2571A

    5 Pages

  5. WS8352

    5 Pages

  6. Model 3180

    2 Pages


Archived catalogues