Model WW5061 Arbitrary Waveform Function Generator - Tabor Electronics - (Version JPG) - Page n° 6 - PDF Catalogue | Technical Documentation

See other catalogues for Tabor Electronics

Generator, Wide-band amplifier, PCI, Impulse generator, Function generator

Text version of the page

Specification 50MS/s Single-Channel Arbitrary Waveform / Function Generator

Model WW50

ACLR (Adjacent Channel Leakage Power Ratio) MULTI-INSTRUMENT SYNCHRONIZATION

GENERAL


	0.1 MS/s	1 MS/s	5 MS/s
10 MHz	63 dB	62 dB	47 dB
20 MHz	56 dB	53 dB	45 dB

Power Supply: Power Consumption: Display:

Operating temperature: Humidity

(non-condensing):

Storage temperature: Interface:

Language: Dimensions:

Weight: Safety: EMC:

Reliability:

Workmanship Standards: Supplied Accessories:

Description: Multiple instruments can be

connected together and synchronized to provide multichannel synchronization.

PHASE (LEADING EDGE) OFFSET

85 to 265V, 48 to 63Hz, 60Wmax

Color LCD, 3.8" reflective, 320 x 240 pixels, back-lit

0 -50°C

11°Cto30°C: 85% 31°Cto50°C: 75%

-40°C to + 70°C. Ethernet 10/100, USB 2.0 and GPIB standard IEEE-488.2-SCPI-1993.0 212 x88 x415mm (WxHxD) Approximately 7 lb EN61010-1, 2nd revision CE marked. Designed to meet VDE 0411/03.81 and UL 1244 MTBF per MIL-HDBK-217E, 25°C, Ground Benign

Conform to IPC-A-610D PowerCord, USB cable, CD containing Operating Manual, ArbConnection software and developer libraries. 5 years standard

Test conditions:

Sample Clock Frequency = 50 MS/s

Sample Clock = Internal

BW = Symbol Rate;

Offset = 1.35x Symbol Rate

TRIGGERING CHARACTERISTICS

Description:

Leading edge of master output trails the leading edge of the slave output by a programmable number of points. Each slave can be programmed to have Individual offset. 0to512k points (1M option)

4 point

< ±15ns, depending on cable length and quality 0.5 meter coax


	System Delay:	3to4 Sample Clook+150ns
	Trigger Start, Stop,
	PhaseControl:	0to512k points (1M option)
	Resolution:	4 points
	Breakpoint Error:	±4 points
	Breakpoint Source: External (Rear Panel Trigger
		Input BNC), Manual, or software
		oommand through Ethernet.
		USB or GPIB
	EXTERNAL
	Connector:	Rear panel BNC
	Level:	TTL
	Slope:	Positive or negative
	Frequency:	DC to 2MHz
	Impedance:	10kn, DCooupled
	INTERNAL
	Range:	100mHzto2MHz
	Resolution:	12 digits, limited by 1uHz
	Accuracy:	0.1%
	MANUAL
	Source:	Soft trigger command through
		the front panel or external
		interface

Range: Resolution and Accuracy: Initial Skew:

typioally with oables

DIGITAL PULSE GENERATOR OPTION

Pulse State: Pulse Mode: Polarity: Period:

Pulse Width: Rise/Fall Time: High Time: Delay:

Double Pulse Delay: Amplitude Window:

Low Level High Level

On/Off

Single or double, programmable

Normal, inverted or complemented

320 ns minimum, programmed

with 4 ns increments

20 ns minimum, 1e3Secmax.

<8ns

0 ns minimum, 1e3 Sec max. 0 ns minimum, 1e3 Sec max. 0 ns minimum, 1e3 Sec max. 10mVp-pto 10Vp-p -5V to +4.990V -4.990V to +5V

Warranty:

ORDERING INFORMATION

MODEL

WW5061

50MS/s Single-Channel ArbitraryWaveform Generator

OPTIONS

NOTES:

1. All pulse parameters, except rise and fall times, may be freely programmed within the selected pulse period provided that the ratio between the period and the smallest incremental unit does not exceed the ratio of 512,000 to 1. With the 1M option, the ratio is extended to 1,000,000 to 1, hence the specifications below do not show maximum limit as each must be computed from the above relationship.

2. Rise and fall times, may be freely programmed provided that the ratio between the rise/fall time and the smallest incremental unit does not exceed the ratio of 100,000 to 1.

3. The sum of all pulse parameters must not exceed the pulse period setting

Option 1:

1 M Memory

ACCESSORIES

GATED MODE

External signal enables generator. First output cyclesynchronous with the active slope of the triggering signal. Last cycle of output waveform always completed

Sync cable:

S-Rack mount: D-Rack mount: Case Kit:

Sync cable for multi Instrument synchronization 19" Single Rack Mounting Kit 19" Dual Rack Mounting Kit Professional Carrying Bag

Note: Options and Accessories must be specified at the time of your purchase.

BURST

Waveforms:

Sine, Triangle, Square, Pulse.

Ramp, Sinc (Sine(x)/x), Gaussian Pulse, Exponential Fall, Rising Pulse, Noise, DC, Arb CountedBurstCycles: 1to1M, programmable Source: Manual, Internal or External

Model WW5061 Arbitrary Waveform Function Generator - Tabor Electronics - #6

Generator, Wide-band amplifier, PCI, Impulse generator, Function generator