• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

Model A10160 45MHz 34Vp-p Single Channel Signal Amplifier - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

45MHz 34Vp-p Single Channel MODEL A1016045MHz 34Vp-p Single Channel Signal Amplifier • 45MHz bandwidth • High amplitude to 34Vp-p into 50Q • High output current drive to 1A • Fast transition time of <10ns • Small footprint, all metal case • Custom gain configuration • Low distortion Model A10160 is an ultra-small footprint, wideband, DC coupled amplifier designed for high frequency, high current, signal amplification. With a high bandwidth of 45MHz, 34Vp-p into 50 ohms and up to 10W output power, the A10160 is the ideal complimentary amplifier to any signal source that needs a supporting power boost for demanding applications. Enhancing Performance The A10160 was designed as a “Snap-On” accessory for the Tabor WaveXciter series and models WS8351/2, both having a maximum amplitude of 4Vp-p, which can be limiting for some applications, requiring higher voltage and current to drive their UUT. Combined with the A10160 the WX and WS models will now offer even higher abilities to solve demanding application requiring up to 45MHz signals at 34Vp-p into 50 ohms loads, without compromising their signal integrity. High Current High Power With a peak output current of 1A and 750mA continuous the A10160 enables a continuous power output of 7.5W, and a peak output power of up to 10W, making it ideal for various pulse applications. Cost Effective Versatile Solution While the A10160 was designed with the Tabor units in mind, it can be used as a standalone amplifier for any signal source. The A10160 offers a compatible, compact and cost effective solution for extending any signal source’s power performance. Optional Configurations The A10160’s standard configuration enables a maximum output voltage of 34Vp-p into 50 ohms with a gain of x10. Other custom gain, such as x15 or 20 can be ordered at the time of the purchase, enabling clients’ even wider variety of choices to solve their application. Target Applications While target applications include piezoelectronics, transducer characterization, MEMS, general electronics and scientific applications, the new A10160 is an ideal solution for virtually any wide bandwidth application that requires high voltage and high current amplification. Visit our website at www.taborelec.com

 Open the catalogue to page 1

Specification INPUT CHARACTERISTICS    GENERAL Channels: Type: Connector: Impedance: Coupling: Damage Level: No. of Channels: Type: Coupling: Connector: Gain: Polarity: Amplitude: Peak Continuous Max. Output Current: Peak Continuous Impedance: Protection: Temperature: Operating Storage Humidity: Safety: Calibration: Warranty: 1 Single Ended Front panel SMA 50Q DC 6Vp-p (-3V to +3V peaks) Frequency Range: DC to 45MHz OUTPUT CHARACTERISTICS 1 Single Ended DC coupled Rear panel BNC x10, fixed (x15 gain optional) Normal 34Vp-p into 50Q 30Vp-p into 50Q 1A 750mA 2.5Q ±5% Short Circuit to Case Ground &...

 Open the catalogue to page 2

All Tabor Electronics catalogues and technical brochures

  1. MODELS SE5081/2

    5 Pages

    En
  2. MODELS 52591/2

    5 Pages

    En
  3. WX1281B

    5 Pages

    En
  4. WW2571A

    5 Pages

    En
  5. WS8352

    5 Pages

    En
  6. Model 3180

    2 Pages

    En

Archived catalogues