Text version of the page

Test Accessories

Taber

®

Abraser & Shear / Scratch Tester Accessories

Specimen Mounting S-36 Specimen Mounting Card, Square – 4
1 / 4 " (108mm) square 50 pcs.card coated on one side with a pressure sensitive adhesive, test record form printed on reverse sideS-36-1 Specimen Mounting Card, Round – same as S-36, but round50 pcs. S-37 Specimen Mounting Sheet, Square – 4
1 / 4 " (108mm) square 100 pcs.card coated on both sides with a pressure sensitive adhesive, test record form printed on one side to permit using as mounting card S-37-1 Specimen Mounting Sheet, Round – same as S-37, but round100 pcs.
Store in original containerRecommended storage conditions: temperature 23°C ±2°C and relative humidity 50% ±5% Specimen Plates S-31 NEMA Standardization Plates, Glass – 4" (100mm) square, 1/8" 10 pcs.(3mm) plate glass with a
1 / 4 " (6.5mm) center hole S-34 NEMA Standardization Plates, Zinc – 4" (100mm) square, 1/32"5 pcs.(0.8mm) zinc with a
1 / 4 " (6.5mm) center hole S-16 Specimen Plates, Steel – 4" (100mm) square, 20 gauge steel 10 pcs.with a
1 / 4 " (6.5mm) center hole S-17 Specimen Plaques, Wood – 4" (100mm) square,
1 / 4 " (6.5mm) thick 10 pcs.birch plywood with a
1 / 4 " (6.5mm) center hole Specimen Plates, Aluminum – 4" (100mm) square, 19 gauge10 pcs.S-18aluminum with a
1 / 4 " (6.5mm) center hole S-38 Specimen Plates, Plastic – 4" (100mm) square,
1 / 8 " (3mm) 10 pcs.Plexiglas with
1 / 4 " (6.5mm) center hole Miscellaneous Rotary Abraser Test Accessories S-11 Refacing Disc – 4" (100mm) diameter, 150 grit abrasive paper 100 pcs.used to reface Taber Calibrase
® abrading wheels ST-11 Duplex Refacing Stone – 4" (100mm) diameter x
1 / 4 " (6.5mm) 1 eachthick, with
1 / 4 " (6.5mm) center hole, opposing sides are fine and coarse – used to reface Taber Calibrase
® abrading wheels or as an abrasive stone to test molded "wheels" 140-109 Counterweights –for use with the Taber Rotary Abraser, reduces 2 eachthe arm load by 125g (175g counterweights also available) Taber Clean-Up Hose – attaches to the rear vacuum nozzle arm opening, facilitating instrument clean-up and cleaning of test specimens
For more information: Call 1.800.333.5300 (U.S.) or 716.694.4000 (outside U.S.) Fax 716.694.1450 Email us at sales@taberindustries.comVisit us at www.taberindustries.com

455 Bryant StreetNorth Tonawanda, New York 14120 USA

02/03