Model M2211 - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

Pressure Transducer Series 2 Bonded Foil Sensing Technology Designed Using Advanced Computer Modeling Tools For optimum performance, the sensing element was designed using Finite Element Analysis and other computer modeling tools. Key features of the sensing element are isolation from induced stresses (generated from installation torque, temperature excursions, vibration and shock), and high over-pressure protection. Manufactured for Aerospace Grade Applications Reliability and accuracy are built into every transducer using advanced manufacturing techniques. Critical procedures such as heat-treat and bonding are controlled through vacuum furnaces. Welding and calibration are accomplished with fully automated work cells. State of the art characterizing electronics meet MIL-STD 461 EMI standards, and are engineered for severe vibration and shock environments. Extreme environmental burnin ensures the transducer's reliability and accuracy will be maintained over time. Pressure and Temperature Outputs An internal 100 Ohms Platinum RTD temperature sensor is a standard feature of the Series 2. The RTD can be used to measure media temperature, or to thermally characterize the output of the pressure transducer. Standard and Customer Configurations Available A full range of options is offered for the Series 2, including alternate materials, pressure ports, electrical connectors, and Standard Features 0-2 thru 0-20k psi +/- 0.2% FSO Static Accuracy 100 Ohms platinum RTD (17) point calibration cert with temp data

 Open the catalogue to page 1

Pressure Transducer Series 2 "On-Board" and Support Applications 0-2 thru 0-20k psi Mechanical Pressure Ranges Proof Pressure Burst Pressure Ranges from 0-2 thru 0-20k psi 2211A 500 psi 1.5X std. range 100 psi 500 psi 3X std. range 2X std. range 1.5X std. Range >1000 psi >3X std. Range >2X std. range >1000 psi >6X std. range >3X std. range >2X std. Range Pressure Port MS33656-4 male * (Alternate pressure ports available) Elect. Connection Materials 316L, 347, 17-4 Stainless Steel * (Plus materials of electrical connector and cable) Dimensions Calibrated at 10 Vdc (15 Vdc max) 20-36 Vdc Unregulated...

 Open the catalogue to page 2

All Taber Industries catalogues and technical brochures

  1. Crockmeter

    2 Pages

    En

Archived catalogues