Catalogue - Discontinued Transducer Models Model 185 - Taber Industries

See other catalogues for Taber Industries

Optical micrometer, Micrometer, Test set, Tester, Adhesion tester

Text version of the page

PRESSURE CONNECTION

MS33649-4

WITH %" HEX

-4V4"-

^#0082 MOUNTING BRACKET (OPTIONAL)

SPECIFICATIONS

0-200, 0-250, 0-300, 0-500, 0-750, 0-1000, 0-1500, Thermal Zero Shift 0-2000, 0-3000 PSIA or PSIS (14.7 PSIA reference). _

All fluids compatible with Carpenter 20 and 347 Triaxial

stainless steel._ Mechanical Shock

H-*?⁰,¹⁵. £¿£1 ^Cit?î ^per ^vo,t ^excitation- Acceleration Error Calibrated at 10.00 VDC excitation.__ -

Less than ±0.010% FSO per °F over compensated temperature range.

30 ffs applied for 11 milliseconds will not cause change in performance characteristics.

Along most sensitive axis: ±0.005% FSO per G._

10 volts DC or AC recommended. 15 volts DC or AC maximum._

350 ±3.5 ohms resistive at +70°F. Input circuitry symmetrical.

350 ±5.0 ohms.

Greater than 10,000 megohms at 50 VDC between all terminals in parallel and case at +70°F.

7/16-20 internal thread per MS33649-4 is standard. Options available._

0-200 PSI range...................0.04 cu. in.

0-250 PSI range...................0.04 cu. in.

0-300 PSI range...................0.04 cu. in.

0-500 PSI range...................0.04 cu. in.

0-750 PSI range...................0.04 cu. in.

0-1000 PSI range...................0.04 cu. in.

0-1500 PSI range....................0.04 cu. in.

0-2000 PSI range...................0.04 cu. in.

0-3000 PSI range...................0.04 cu. in.

Hermetic Bendix Pygmy Types PCIH-10-6P is standard. Standard wiring: Excitation +D, -C & F; Signal +A, -B & E.

Options available. _

Entire housing and pressure cavity of stainless steel. All electrical components sealed against adverse environmental conditions.

Less than 9 ounces.

J"ressure Ranges

Measurand Fluids

Full Scale Output

Excitation

Zero Balance

0.00±0.03 MV per volt at +70°F._

Within ±0.25% FSO._

End Point Linearity

Input Resistance

Less than 0.25% FSO.

Hysteresis

Repeatability

Within 0.10% FSO.__

Output Resistance

Resolution

Infinite.__

Insulation Resistance

0-200 PSI range........... 4.0KHz _

0-250 PSI range........... 4.5KHz

0-300 PSI range........... 4.8KHz Pressure Connection

0-500 PSI range........... 6.3KHz

0-750 PSI range........... 7.2KHz

Natural Frequency

Pressure Cavity Volume

0-1000 PSI range........... 7.5KHz

0-1500 PSI range...........10.5KHZ

0-2000 PSI range...........U.3KHz

0-3000 PSI range...........12.0KHz

Application of 3 times rated pressure range or 6000 PSI, whichever is less, will not cause change in performance characteristics.

Greater than 5 times rated pressure range or 8000 PSI

whichever is less. Electrical Receptacle

-30°Fto +170°F. Options available.

Proof Pressure

Burst Pressure Ratini

Compensated Temperature Range

Operating Temperature Range

Enclosure

-100-F to +300°F.

Less than ±0.005% FSO per *F over compensated -

temperature range. Weight

Thermal Sensitivity Shift

Terminology in accordance with ISA Standard S37.3.

Discontinued Transducer Models Model 185 - Taber Industries - #1

Optical micrometer, Micrometer, Test set, Tester, Adhesion tester