catalogue search
P. 01
P. 02
|
|
You may also be interested in
Abrasion tester, Micrometer, Optical micrometer, Test set, Tester
Text version of the page
| Bonded Strain Gage Differential Pressure Transducer | |||||||||||||||||||||||||||||||||
| Specif/cations; | |||||||||||||||||||||||||||||||||
| Spécifications; | |||||||||||||||||||||||||||||||||
| Insulation Resistance Pressure Connection Pressure Cavity Volume Electrical Receptacle Enclosure | |||||||||||||||||||||||||||||||||
| Greater than 10k megohms at 50 Vdc between all terminals in parallel and case at +70°F (+21°C). 7/16-20 internal thread per MS33649-4. Options available. .50 in3 (8.2 ml) excluding MS33649-4 fitting. | |||||||||||||||||||||||||||||||||
| Materials of Construction | Case and Pressure Caps: 316 Stainless Steel Diaphragms: 347 Stainless Steel Pressure Cap O-Ring: Teflon® 3.0 ±0.03 mV open circuit per volt excitation for high side. Calibrated at 10.00 Vdc excitation. 0.00 ±0.03 mV per volt at +70°F (+21°C). Within ±0.5% FSI per 1000 PSI typical Within ±1.0% FSO per 1000 PSI typical for 2 and 3 PSID ranges. Within ±0.25% FSO. Within ±0.25% FSO. Within 0.20% FSO. Infinite. 1200 PSID may be applied to either port without causing a zero shift greater than ±1% FSO. | ||||||||||||||||||||||||||||||||
| Full Scale Output Zero Balance Zero Shift with Line Pressure | |||||||||||||||||||||||||||||||||
| Stainless steel receptacle to mate with MS3106-14-2S. Standard wiring: Excitation +A, -D; Signal +B, -C. Options available. Entire housing and pressure cavity of stainless steel. All electrical components sealed against adverse environmental conditions. Approximately 9.5 pounds (4.3 kg). | |||||||||||||||||||||||||||||||||
| Linearity Hysteresis Repeatability Resolution Differential Overload Pressure (Toggk) Rated Line Pressure Compensated Temperature Range Operating Temperature Range Thermal Sensitivity Shift Thermal Zero Shift | |||||||||||||||||||||||||||||||||
| Weight | |||||||||||||||||||||||||||||||||
| 5000 PSIG maximum. | |||||||||||||||||||||||||||||||||
| -10°F to 160°F (-23°C to +71°C). | |||||||||||||||||||||||||||||||||
| -40°F to 185°F (-40°C to +85°C). | |||||||||||||||||||||||||||||||||
| Less than ±0.020% FSO per °F over compensated temperature range (±0.036% FSO per °C) Less than ±0.010% FSO per °F over compensated temperature range. Less than ±0.020% FSO per °F for 2 and 3 PSID ranges. (±0.018% FSO per °C and ±0.036% FSO per °C). 10 volts dc or ac rms recommended. 15 volts dc or ac maximum. 350 ±3.5 ohms at +70°F (+21°C). Input circuitry symmetrical. 350 ±5.0 ohms at +70°F (+21°C). | |||||||||||||||||||||||||||||||||
| Excitation | |||||||||||||||||||||||||||||||||
| Input Resistance Output Resistance | |||||||||||||||||||||||||||||||||
| 455 Bryant Street North Tonawanda, New York 14120 USA Phone 1.800.333.5300 (U.S.) or 716.694.4000 (outside U.S.) Fax 716.694.1450 Email sales@taberindustries.com | |||||||||||||||||||||||||||||||||
| Visit us at www.taberindustries.com TK05/02 | |||||||||||||||||||||||||||||||||