catalogue search
P. 01
P. 02
|
|
You may also be interested in
Optical micrometer, Abrasion tester, Adhesion tester, Testing machine, Test set
Text version of the page
| Bonded Strain Gage Differential Pressure Transducer | |||||||||||||||||||||||||||||||
| Spécifications; | |||||||||||||||||||||||||||||||
| Specif/cations; | |||||||||||||||||||||||||||||||
| Insulation Resistance Pressure Connection Pressure Cavity Volume Electrical Receptacle Enclosure | |||||||||||||||||||||||||||||||
| Greater than 10k megohms at 50 Vdc between all terminals in parallel and case at +70°F (+21°C). 7/16-20 internal thread per MS33649-4. Options available. .50 in3 (8.2 ml) excluding MS33649-4 fitting. | |||||||||||||||||||||||||||||||
| Materials of Case and Pressure Caps: 316 Stainless Steel Construction Diaphragms: 347 Stainless Steel Pressure Cap O-Ring: Teflon® Fill Fluid: Krytox® Oil Full Scale Output 3.0 ±0.03 mV open circuit per volt excitation for high side. Calibrated at 10.00 Vdc excitation. Zero Balance 0.00 ±0.03 mV per volt at +70°F (+21°C). Zero Shift with Within ±1% FSO. Line Pressure Within ±2% FSO for 2 and 3 PSID ranges. Linearity Within ±0.25% FSO. Hysteresis Within ±0.25% FSO. Repeatability Within 0.20% FSO. Resolution Infinite. | |||||||||||||||||||||||||||||||
| Stainless steel receptacle to mate with MS3106-14-2S. Standard wiring: Excitation +A, -D; Signal +B, -C. Options available. Entire housing and pressure cavity of stainless steel. All electrical components sealed against adverse environmental conditions. Approximately 6.5 pounds (4.3 kg). | |||||||||||||||||||||||||||||||
| Weight | |||||||||||||||||||||||||||||||
| Differential Overload Pressure (Toggle) Rated Line Pressure Compensated Temperature Range Operating Temperature Range Thermal Sensitivity Shift Thermal Zero Shift | 1200 PSID may be applied to either port without causing a zero shift greater than ±1% FSO. | ||||||||||||||||||||||||||||||
| 1200 PSIG maximum. | |||||||||||||||||||||||||||||||
| -10°F to 160°F (-23°C to +71°C). | |||||||||||||||||||||||||||||||
| -40°F to 185°F (-40°C to +85°C). | |||||||||||||||||||||||||||||||
| Less than ±0.020% FSO per °F over compensated temperature range (±0.036% FSO per °C) Less than ±0.010% FSO per °F over compensated temperature range. Less than ±0.020% FSO per °F for 2 and 3 PSID ranges. (±0.018% FSO per °C and ±0.036% FSO per °C). 10 volts dc or ac rms recommended. 15 volts dc or ac maximum. 350 ±3.5 ohms at +70°F (+21°C). Input circuitry symmetrical. 350 ±5.0 ohms at +70°F (+21°C). | |||||||||||||||||||||||||||||||
| Excitation | |||||||||||||||||||||||||||||||
| Input Resistance Output Resistance | |||||||||||||||||||||||||||||||
| 455 Bryant Street North Tonawanda, New York 14120 USA Phone 1.800.333.5300 (U.S.) or 716.694.4000 (outside U.S.) Fax 716.694.1450 Email sales@taberindustries.com Visit us at www.taberindustries.com TK05/02 | |||||||||||||||||||||||||||||||