Visiport VP220.C Model Variants - T2K Tooling 2000 - #1

ISI

■ Extra drainage features to cope with high coolant volume applications

■ I ntegrated surface-mount electronics with reverse polarity protection

■ Brushless DC motor, 24 VDC, 5 Amp minimum supply requirement

■ Steady state current draw 250 mA (with no coolant load)

■ Optical sensor provides unit with flashlight powered on/off switch

■ Long life, instrument-rated bearing set

■ Balanced, rotating disc window, with chemically strengthened glass

■ DLC* coating for 10X plus resistance to glass wear (optional)

■ Mounting plate for easy installation and low life-cycle cost

■ Sealed connection cavity with exit ports left, right, and bottom

■ Flex conduit or PUR tubing for harness routing (EO/EO2 optional)

■ Terminal box with mechanical on/off/reset toggle switch

■ Simple unit installation and removal

■ Quick, easy maintenance

■ One year limited warranty

■ For more information, call us toll free or visit us at: http://www.t2k.net

Visiport Model VP220.C with H Fitting for Flex Conduit installed in exit port.

Visiport® may be installed from vertical to 30° from vertical position. Visiport® may also be installed in moving or fixed (non-opening) windows. The Visiport® package contains the Visiport® base unit, installation manual, terminal box, tools for removing the spin disc, motor assembly, and a small parts replacement kit.

Visiport® works best with water-based coolants and light mineral oils. (Heavier oils impair performance.) For machines without necessary amperage, optional 120 watt power supply is available. All Visiport® units require the use of a flexible conduit/wire harness and power cable, priced separately by length.

On properly prepared surfaces, it is nearly impossible to separate mounting plates or directly mounted spin windows from the glass or polycarbonate substrate. Visiport® systems are designed to have a bonding strength safety factor of better than 20 to 1.