Visiport VP220.B5 Model Variants - T2K Tooling 2000 - #1

ISI

■ Integrated surface-mount electronics with reverse polarity protection

■ Brushless DC motor, 24 VDC, 5 Amp minimum supply requirement

■ Steady state current draw 250 mA (with no coolant load)

■ Optical sensor provides unit with flashlight powered on/off switch

■ Long life, instrument-rated bearing set

■ Balanced, rotating disc window, with chemically strengthened glass

■ DLC* coating for 10X plus resistance to glass wear (optional)

■ Mounting plate for easy installation and low life-cycle cost

■ Sealed connection cavity with exit ports left, right, and bottom

■ Flex conduit or PUR tubing for harness routing (EO/EO2 optional)

■ Terminal box with mechanical on/off/reset toggle switch

■ Simple unit installation and removal

■ Quick, easy maintenance

■ One year limited warranty

■ For more information, call us toll free or visit us at: http://www.t2k.net

Visiport Model VP220.B5 with N Fitting for PUR Tubing installed in exit port.

Visiport® may be installed from vertical to 30^o from vertical position. Visiport® may also be installed in moving or fixed (non-opening) windows. The Visiport® package contains the Visiport® base unit, installation manual, terminal box, tools for removing the spin disc, motor assembly, and a small parts replacement kit.

Visiport® works best with water-based coolants and light mineral oils. (Heavier oils impair performance.) For machines without necessary amperage, optional 120 watt power supply is available. All Visiport® units require the use of a flexible conduit/wire harness and power cable, priced separately by length.

Adhesive Carrier....................Closed Cell Acrylic Foam

Peel Adhesion.........................20 lbs/in - 3.5 N/mm

Tensile Adhesion................... 140 lbs/in² - 1.0 N/mm²

Dynamic Shear Adhesion..... 80 lbs/in² - 0.55 N/mm²

On properly prepared surfaces, it is nearly impossible to separate mounting plates or directly mounted spin windows from the glass or polycarbonate substrate. Visiport® systems are designed to have a bonding strength safety factor of better than 20 to 1.