MONORACE - 36 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

Catalogue excerpts

E RANG AIL AL R LINE LINEAR RAIL RANGE

 Open the catalogue to page 1

T RACE Spa is honoured to present it's new wide range of lin- ear bearings, all based on innovative technical concepts. The original range based on MR-rails for slides with double row bearings and high performing roller telescopic slides, has been en large to include a range based on new ML-rails, offering a more economical range of sliders with single row bearings and a full range of ball-cage telescopic slides with high load The rail/slider system is size wise the market's highest per- forming roller based system, meanwhile too the most compact The heavy duty roller telescopic slides, offer...

 Open the catalogue to page 2

LINEAR ROLLER BEARINGS T RACE'S range of linear bearings are setting new standards due to its innovative design and technical concepts. The family MONORACE, based on a different C-shaped rails with a wide range of sliders, is offering unique linear solutions for all kinds of automation applications for many industries. T RACE'S system with roller sliders and internal raceways, offer the markets highest performing system along with being size wise the most compact system. The rails series MR - ML are high precision cold-drawn profiles, made from a specific Casehardening steel alloy, to assure optimal surface...

 Open the catalogue to page 3

LINEAR ROLLER BEARING SYSTEM with MR rail and R, R.T, R.S sliders The MR Series Linear Rail System consists of a C-section steel rail with internal convex raceways, where robust double row ball bearing rollers travel. The high precision rollers are lubricated for life and protected with 2RS seals. Sliders are available with three or five rollers, including eccentrics to adjust the bearing preload. Both ends of the sliders are equipped with polyimide wipers to remove debris from the raceway and grease impreg- nated felt wipers to lubricate the raceways for long life with minimal maintenance. The...

 Open the catalogue to page 4

Sliders are available with either 3 or 5 rollers. For the 3 roller version, the first and third roller are fixed, concentric rollers that run on the same raceway. The second roller is eccentric and runs on the opposite raceway. The eccentric feature is used to adjust the slider preload in the rail. For the 5 roller version, the two lateral and the central roller are fixed, and The second and fourth roller are eccentric and run on the opposite raceway. The eccentric feature is used to adjust the slider preload in the rail. Because one raceway contacts more rollers than the other raceway, the sliders...

 Open the catalogue to page 5

* Special flat-head TORX screws supplied with rails. MR Series Rails are made in 3 sizes 18mm, 28mm and 43mm with two types of mounting holes: MR .. L with counterbored mounting holes for special low head TORX mounting screws that are provided with the rail. MR .. S with countersunk mounting holes for UNI-standard IS05933 fasteners. The rail has a "C" shaped cross-section with interior, convex raceways. The convex raceways are polished for smooth, low noise motion. The interior raceways are protected from acci- dental bumps and other damages, that can spoil the surface. The shape also protects...

 Open the catalogue to page 6

3 Rollers slider for R. series 5 Rollers slider for R. series RV Guiding slider dimensions RA series - Rotating slider RP series - Floating slider RF series - Extra floating slider

 Open the catalogue to page 7

Sliders of series RVT, RAT, RPT , RFT, provide fixing holes parallel to the preferable radial load direction. As the slider body protrudes from rail level, moving part can be resting on top of the linear system, while being fixed from above with threaded holes or from below with through passing holes. The A and B versions differ only in the arrangement of the rollers providing maximum radial load capacity either toward or against the mounting surface. The preferential loading direction is marked by two circular notches. (Ordering code example: RVT28-3A or RVT28-3B) The slider body allows two methods...

 Open the catalogue to page 8

3 Rollers slider for R.T series - Version A 5 Rollers slider for R.T series - Version A 3 Rollers slider for R.T series - Version B 5 Rollers slider for R.T series - Version A Example of order code. RVT28-3B : Guiding slider with 3 roller, version B

 Open the catalogue to page 9

LINEAR RAIL RANGE Very compact slider, with slim strong slider body, for application with limited space. Performance like standard R-sliders including self aligning concept. Featuring extra long 4-roller version to optimize performance with only 1 slider, instead of 2 sliders. Guiding slider series RVS. Version R.S.-.. standard with threaded holes with cylindrical holes The sliders are available in standard version with threaded fixing holes R.S-.. and in version ...C with through passing holes for inside fixing with standard cylindrical screws DIN912, with no interference 3 Rollers slider for...

 Open the catalogue to page 10

Rotating slider RAS series Floating slider RPS series Extra floating slider RFS series

 Open the catalogue to page 11

Linear Roller Bearing System with ML rail and RL, RLS sliders The ML Series Linear Rail System consists of a C shaped steel rail with internal concave raceways where robust ball bearing rollers travel. The high precision rollers are lubricated for life and protected with 2Z seals. Sliders are available with three or five rollers includ- ing eccentrics to adjust the slider's preload. Both ends of the sliders are equipped with polyimide wipers to remove debris from the race- way and grease impregnated felt wipers to lubricate the raceways for long life with minimal maintenance. Sliders include a...

 Open the catalogue to page 12

* Special flat-head TORX screws supplied with rails. TECHNICAL DATA ML Series Rails are made in two sizes 28mm and 43mm with two types of mounting holes: ML.. L with counterbored mounting holes for special low head TORX mounting screws that are provided with the rail. ML.. S with countersunk mounting holes for UNI-standard IS05933 fasteners. The rail has a "C" shaped cross-section with interior, concave raceways. The concave raceways are polished for smooth, low noise motion. The interior raceways are protected from accidental bumps and other damage that can spoil the surface. The shape also protects the...

 Open the catalogue to page 13

All T Race S.p.A. catalogues and technical brochures

  1. GENERAL CATALOGUE

    84 Pages

    En
  2. TELERACE

    36 Pages

    En

Archived catalogues

  1. CATALOGUE

    24 Pages

    En