Linear Roller System with MR rail and R, R.T, R.S sliders - 10 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

Catalogue excerpts

LINEAR RAIL RANGE Linear Roller System with MR rail and R, R.T, R.S sliders The MR Series Linear Rail System consists of a C-section steel rail with internal convex raceways, where robust double row ball bearing rollers travel. The high precision rollers are lubricated for life and protected with 2RS seals. Sliders are available with three or five rollers, including eccentrics to adjust the bearing preload. Both ends of the sliders are equipped with polyamide wipers to remove debris from the raceway and grease impregnated felt wipers to lubricate the raceways for long life with minimal maintenance. The MR rail system is especially equiped for harsh environments where contamination is a problem. Most bearing systems utilize a groove that a roller or ball travel within. These grooves capture and hold debris that eventually cause the bearing to fail. The convex raceway of the MR Series provides a place for debris and other contaminates to be pushed aside by the rollers. This feature enables the MR Series to function in environments where other bearings quickly fail. R.T Sliders Series are made of zinc plated steel with mounting holes perpendicular to the roller axis and parallel with the direction of preferred loading. The sliders have sealed rollers and axial wipers for protection of the internal parts. The R.T Series Sliders are available in 2 sizes and with either 3 or 5 rollers R Sliders Series are made of zinc plated steel with mounting holes parallel to the roller axis and perpendicular to the direction of preferred loading.The sliders have sealed rollers, axial wipers, and longitudinal seals for optimal protection of the internal parts and a sealing strip to prevent accidental tampering of the fixed rollers. The R Series Sliders are available in 3 sizes and with either 3 or 5 rollers. The R.S Sliders Series have a very slim body to obtain the most compact slider possible, without sacrificing performance. They also offer both threaded and through hole mounting options. The standard slider body is made from zinc plated steel but is also available in all Stainless Steel construction for higher corrosion resistance. The R.S Series Sliders are available in 2 sizes, 2 materials, and with either 3, 4 or 5 rollers.

 Open the catalogue to page 1

Sliders are available with either 3 or 5 rollers. For the 3 roller version, the first and third roller are fixed, concentric rollers that run on the same raceway. The second roller is eccentric and runs on the opposite raceway. The eccentric feature is used to adjust the slider preload in the rail. For the 5 roller version, the two lateral and the central roller are fixed, and run on the same raceway. The second and fourth roller are eccentric and run on the opposite raceway. The eccentric feature is used to adjust the slider preload in the rail. Because one raceway contacts more rollers than...

 Open the catalogue to page 2

MR rails LINEAR RAIL RANGE (Example od order code: MR28L - 640) * Special flat-head TORX screws supplied with rails. Tightening Torque TECHNICAL DATA MR Series Rails are made in 3 sizes 18mm, 28mm and 43mm with two types of mounting holes: MR .. L with counterbored mounting holes for special low head TORX mounting screws that are provided with the rail. MR .. S with countersunk mounting holes for UNI-standard ISO5933 fasteners. The rail has a “C” shaped cross-section with interior, convex raceways. The convex raceways are polished for smooth, low noise motion. The interior raceways are protected...

 Open the catalogue to page 3

3 Rollers slider for R. series D C RV Guiding slider dimensions Rail type 5 Rollers slider for R. series RA series – Rotating slider Series (+/-) a° RP series – Floating slider RF series – Extra floating slider

 Open the catalogue to page 4

R.T sliders for MR rails LINEAR RAIL RANGE RVT Guiding slider dimensions Sliders of series RVT, RAT, RPT , RFT, provide fixing holes parallel to the preferable radial load direction. As the slider body protrudes from rail level, the moving part can be resting on top of the linear system, while being fixed from above with threaded holes or from below with through passing holes. Threaded holes for top mounting Passing holes for bottom mounting, screw UNI 5931 Slider type Tipo vite The A and B versions differ only in the arrangement of the rollers providing maximum radial load capacity either toward...

 Open the catalogue to page 5

3 Rollers slider for R.T series - Version A Example of order code. RVT28-3B: Guiding slider with 3 roller, version B

 Open the catalogue to page 6

R.S and R.SX sliders for MR rails LINEAR RAIL RANGE Very compact slider, with slim strong slider body, for application with limited space. Performance like standard R-sliders including self aligning concept. Featuring extra long 4-roller version to optimize performance with only 1 slider, instead of 2 sliders. Guiding slider series RVS. Version R.S.-.. standard with threaded holes H Version R.S.-..C version with cylindrical holes The sliders are available in standard version with threaded fixing holes R.S-.. and in version …C with through passing holes for inside fixing with standard cylindrical...

 Open the catalogue to page 7

R.S and R.SX sliders for MR Rotating slider RAS series Floating slider RPS series Extra floating slider RFS series Rail Type Load capacity

 Open the catalogue to page 8

R. rollers for MR, FXR rails LINEAR RAIL RANGE The ROLLERACE rollers are designed around a double-row precision ball bearing to guarantee both high radial and axial load capacities. The rollers are protected by a double lip sealing system (2RS) to assure long lifetime, even in difficult environments. The integrated roller pivot has concentric or eccentric shape, to allow for preload setting in the different systems. The bearings are made to precision class DIN620 of core-hardened carbon steel. The rollers are available in series R.V with 2 contact points on the protruding raceways to obtain, a...

 Open the catalogue to page 9

Lateral E D C M G N A B P R F L H Version floating (mm) (mm) (mm) (mm) (mm) Flat key (mm) (mm) (mm) (mm) (mm) (mm) (mm) x Roller code Load capacity Dynamic (N) Weight coeff. (g) C (N) Co rad Co ax eccentric concentric freely floating plain Position R refered to FXR rail is indicated at page 26

 Open the catalogue to page 10

All T Race S.p.A. catalogues and technical brochures

  1. GENERAL CATALOGUE

    84 Pages

    En
  2. TELERACE

    36 Pages

    En
  3. MONORACE

    36 Pages

    En

Archived catalogues

  1. CATALOGUE

    24 Pages

    En