• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

Super Series ? Vacuum Furnace System - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

Super Series™ Vacuum Furnace System It’s super-precise and super-fast. The T-M Vacuum Super Series Vacuum Furnace System is the highvacuum, high-temperature technically advanced vacuum furnace to satisfy all your heat-treating needs. Within its all-stainless steel chamber is a two cubic foot work zone capable of holding up to 200 pounds of material for tempering, austenitizing, hardening, stress relieving, brazing, sintering, bonding, annealing, and many other custom vacuum processes. Above: The Super Series SS12-24/13MX With the standard three-zone heat control package and electropneumatically operated "heat pack" door shield assembly, a precision heating environment is created that can attain a consistent temperature uniformity of < ± 3˚C. The specially designed Hot Zone-to-chamber ratio enables the highspeed pumping system to reach high vacuum quicker, maximizing your productivity and quality with a cleaner work zone. With its inert gas on board quick cool system, the metallurgical gas quench increases your cycle times by rapidly cooling the chamber and increasing your product output. The Super Series HMI software system can be configured with our controlled cooling, allowing the user to precisely control the cooling environment. The Super Series Vacuum Furnace System can also be configured to accept multiple process gases. Once you have detemined your specific process parameters, the computerized control system takes over to completely automate the process and archive all system data. An operator needs only to load and unload the chamber and press the start button. The Super Series Vacuum Furnace System is a completely contained unit with no exposed wires, cables or pumps. This saves you valuable factory floor space, and keeps your unit clean and easy to maintain. System installation is as simple as connecting the unit to electric service and attaching gas, water and air lines. The Hot Zone is fully removable for service. Above: The Super Series 12"W x 12"H x 24"D If the Super Series work zone is not large enough for your application, please ask about our PACER Series Vacuum Furnace System. all Molybdenum Hot Zone Left: Full PC control system HIGH-TEMPERATURE | HIGH-VACUUM SYSTEMS 630 South Warrington Street

 Open the catalogue to page 1

series series series series series Operating Pressure Range High-vacuum to 2 bar (higher pressures available) Working pressure at maximum temperature: high-vacuum to 1 torr (higher pressures available) Capable of pressures between atmosphere and 2 bar (for quick cool use) SCR Power Supply regulation 3-zone heat control with independent PID loop control Usable work zone 12" W x 12" H x 24" D Vacuum Pumping System Usable work zone volume of 2 cubic feet Standard pump down time* To 0.1 Torr 7 minutes 10-5 Torr Scale 15 minutes Work load capacity 200 lbs Round, horizontally-mounted hot zone comprised...

 Open the catalogue to page 2

All T-M Vacuum Products, Inc. catalogues and technical brochures