Text version of the page

Operation

WARNING: Solvent used in this Recycling Parts Washer is a combustible liquid and vapor. Addingother chemicals to the cleaning solvent, including but not limited to kerosene, fuel oil, gasoline,detergents, or chlorinated solvents may cause hazardous conditions which the manufacturer has nocontrol over and bears no responsibility. The parts washer lid has a fusible link assembly that holds the lid open during use. This fusible link isa safety feature designed to release the lid in case of fire allowing the lid to close. Do not modify,alter, or obstruct the operation of the fusible link. Do not leave unattended objects in the sink whichwould interfere with the closing of the lid. Do not place hot parts into the Recycling Parts Washer. Do not spray aerosols into or around Recycling Parts Washer. Do not clean or degrease porous or absorbent materials, such as cloth, leather, wood or paper. Do not operate Recycling Parts Washer if any leak is apparent or occurs during use. Contact yourservice representative. Unit produces heat. Do not open the distillation drain knob during a recycle process, or if hot totouch. Allow the unit to complete the recycle process and always be sure it is cool beforeattempting to remove oil waste . Close fire lid when not in use. Cleaning operations should be conducted in a manner that prevents spillage, splashing, ormisting.

Service

Service should only be performed by an authorized technician. Risk of electric shock or seriousinjury may occur if improperly serviced. MODIFICATION OF EQUIPMENT WILL VOID THE MANUFACTURER WARRANTY.
P/N: 60400601REV: 02/04

4