Catalogue - Flammable Gas P/N 711 - Synkera Technologies

See other catalogues for Synkera Technologies

Sensor, Semiconductor sensor, Nitrogen dioxide sensor, Hydrogen sulfide sensor, Gas sensor

Text version of the page

Flammable Gas Sensor Data Sheet ^S?, T^"⁰'⁰⁹^⁵' .J^nc-

2021 Miller Dr., Suite B

(P/N 71.1J Longmont' CO 80501

SENSOR FEATURES:

• High sensitivity to a wide range of flammable gases.

• Non-specific response, calibration factors available upon request.

• Typical response time <1 minute to 90% full scale.

• Environmental temperature range of -20 to 50°C.

• Minimal response to environmental humidity over the range of 0 - 95%, non-condensing

• Rugged, reliable sensor based on Synkera's exclusive technology.

1.E+07


	air	air p
	*— "^r*	air p
	20	0 ppm
	500 ppm /" 1000 ppm 5000 ppm

S a

-m

1.E+06

1.E+05

1.E+04

1020

Time (mins)

Sensor Resistance as a function of Typical sensor response to propane in a concentration for several flammable gases humid environment

Electrical Characteristics

The electrical properties below are typical for Flammable Gas Sensors. If the actual values differ the customer will be notified with the shipment. Circuits are available that will be preset to the correct values.


Property	Symbol	Value	Remarks
Heater Power Consumption	Ph	~ 900 mW	At Vh = 5.3V
Heater Voltage	Vh	5.3 VDC	Tsensor ~300°C
Heater Resistance	Rh	32 Q ± 2 Q	At room temperature
Sensing Voltage	Vc	5.0 VDC	Recommended

720-494-8401 e-mail: info@synkera.com

www.synkera.com 720-494-8402 (fax

• For information on warranty, please refer to Synkera Technologies, Inc. Standard Terms and Conditions.

• Information on this data sheet represents typical values from a number of Synkera sensors. Actual values from sensor to sensor can vary slightly.

Flammable Gas P/N 711 - Synkera Technologies - #1

Sensor, Semiconductor sensor, Nitrogen dioxide sensor, Hydrogen sulfide sensor, Gas sensor