Heat Exchanger Tube Plugs: TP Series - SWAGELOK - #1

Text version of the page

Heat exchanger tube plugs seal the ends of leaking tubes, providing longer use of the heat exchanger. The uniform taper and the smooth surface finish assure positive sealing with a minimum installation force. Sizes Tube plugs are sized to fit tube diameters from 1/2 through 1 in. with standard wall thicknesses of  11 through 14 gage  12 through 17 gage  15 through 20 gage based on Birmingham or Stubs gage system. Other sizes available on request. Materials Tube plugs are available in a variety of materials for system compatibility. Swagelok—TM Swagelok Company, © 1972, 1981, 1999, 2002 Swagelok Company, Printed in U.S.A., MI, June 2002, R2, MS-01-93 Heat Exchanger Tube Plugs TP Series E C D A B Ordering Information / Dimensions Tube Plugs Tube plugs driven into leaking tubes just before heat exchanger goes back into operation. A Tube Outside Diameter in. (mm) Dimensions, in. (mm) C Length E Diameter B1 Tube Wall Gage B2 Tube Wall Thickness in. (mm) Basic Ordering Number. D Diameter 5/8 (15.9) 3/4 (19.1) 7/8 (22.2) 11-14 15-20 0.083 to 0.120 (2.1 to 3.0) 0.035 to 0.072 (0.9 to 1.8) -10TP-11-14 -10TP-15-20 1.57 (39.9) 1.58 (40.1) 0.405 (10.3) 0.496 (12.6) 0.491 (12.5) 0.582 (14.8) 11-14 12-17 15-20 0.083 to 0.120 (2.1 to 3.0) 0.058 to 0.109 (1.5 to 2.8) 0.035 to 0.072 (0.9 to 1.8) -12TP-11-14 -12TP-12-17 -12TP-15-20 1.58 (40.1) 2.09 (53.1) 1.59 (40.4) 0.530 (13.5) 0.546 (13.9) 0.621 (15.8) 0.616 (15.6) 0.663 (16.8) 0.707 (18.0) 11-14 15-20 0.083 to 0.120 (2.1 to 3.0) 0.035 to 0.072 (0.9 to 1.8) -14TP-11-14 -14TP-15-20 1.60 (40.6) 1.62 (41.1) 0.650 (16.5) 0.746 (18.9) 0.736 (18.7) 0.832 (21.1) 1 (25.4) 11-14 12-17 15-20 0.083 to 0.120 (2.1 to 3.0) 0.058 to 0.109 (1.5 to 2.8) 0.035 to 0.072 (0.9 to 1.8) -16TP-11-14 -16TP-12-17 -16TP-15-20 1.62 (41.1) 2.11 (53.6) 1.63 (41.4) 0.780 (19.8) 0.793 (20.1) 0.871 (22.1) 0.866 (22.0) 0.910 (23.1) 0.957 (24.3) 0.035 to 0.072 (0.9 to 1.8) -8TP-15-20 1.56 (39.6) 0.371 (9.4) 0.457 15-20 (11.6) 1/2 (12.7) 11-14 0.083 to 0.120 (2.1 to 3.0) -8TP-11-14 1.55 (39.4) 0.280 (7.1) 0.366 (9.3) . For a complete Ordering Number, add B for brass, SS for 316 stainless steel, INC for Alloy 600, M for Alloy R-405, or S for carbon steel as a prefix to the Basic Ordering Number. Example: B-14TP-15-20. Dimensions, in inches (millimeters), are for reference only and are subject to change. www.swagelok.com  360 brass/ASTM B16  316 stainless steel/ASTM A479  1214 carbon steel/ASTM A108  alloy 600/ASTM B166  alloy R-405/ASTM B164