Distribution Manifold, J6 Series - SWAGELOK - #1

Text version of the page

www.swagelok.com Shroud protects stem threads against ingress of dirt and dust Stem threads are cold rolled for high strength and smooth operation; stem threads above packing are protected from system media One-piece, integral body for less weight, fewer leak points, and more strength Stainless steel handle with square drive stem and lock nut to ensure positive actuation Choice of packing and bonnet seal materials Safety back-seating needle seals in fully open position Distribution Manifold J6 Series �¡ Extruded stainless steel body rated for 6000 psig (413 bar) working pressure �¡ Compact, versatile manifold for gas and liquid applications �¡ Fewer potential leak points than conventional distribution manifolds �¡ Four to eighteen needle valves and outlet connections �¡ Mounting holes through the manifold to reduce stress on the piping system Two-piece knuckle joint enables nonrotating needle; joint is above packing, protected from system media Materials of Construction Component Grade/ASTM Specification Body, bonnets 316/316L SS/A479 Needles S17400 SS/A564 condition H1150D Packing, bonnet seals PTFE or graphite Lubricant Molybdenum disulfide in hydrocarbon carrier Bonnet seal rings, gland nuts, shrouds, stems, glands, handles, handle lock nuts, handle washers, locking pins, gland lock nuts 316 SS Wetted components listed in italics. Nonrotating hardened needle for positive shutoff Testing Every valve is hydrostatically tested at ambient temperature. Options and Accessories �¡ Flanged inlet connections available �¡ Antitamper feature available �¡ Bleed/drain valve available �¡ Hydrostatic test certifi cates complete with full chemical and physical material certifi cations available For these and other options and accessories, contact your authorized Swagelok® sales and service representative.