Catalogues - introduction-to-high-performance-tools

Catalogue Introduction to High Performance Tools

Page

/ 8

/ 8

Text version of the page

Application Guide

material tabe ■

tabella materielle

ble B

atériaux teriale I

Tabelle


	O^uni	- (green band) for "normal" materials
	w	- (yallow band) for soft materials
	O ^va	= (blue band) for tough materials
		= (red band) for hard materials
		= (white band) for cast iron materials
		= (orange band) for copper materials
		= (black band) for aluminium materials
	RL	= material range suitable for thread rolling
	Ti	= for titaniums
	Ni	- for nickels

I Sutton Toots I

Material examples

Tensile Strength M N/mm M

Material Type

Hardness

AISI / USA (common examples)

DIN

Material No.


Cu	Copper - Unalloyed	<100 HB	<350	101	C1020, C1011	E-Cu57, SE-Cu	2.0060, 2.0070
	Brass - Long chipping	<200 HB	<700	C24000, C26800, C34800	C2800, C2801	CuZN39Pb2, CuZn40 C3770, C3771	2.0250, 2.0380, 2.0360
	Aluminium - Alloyed, Si >0.5 - s10%	<120 HB	<400	4043, 380, 355.1, A356.2	ADC10, AC2B, AC4A, AC4D	GD-A1Ci8Cu G-A1Si5Mg	3.2162.05 3.2341.01
Al	Aluminium - Unalloyed	<100 HB	<350	LMO, 1B (1050A) Magnesium, Extruded Aluminium	IN90, IN99	A199.5	3.0255
	Aluminium - Alloyed, Si s 0.5%	<150 HB	<500	5083, 2024, 6061, 7075 Low silicon wrought & cast aluminium	A7075,A6061	AlCuMg2, A1Mg2Mn0.8	3.1355, 3.3525
\J	Aluminium - Alloyed, Si >0.5 - s10%	<120 HB	<400	4043, 380, 355.1, A356.2	ADC10, AC2B, AC4A, AC4D	GD-A1Ci8Cu G-A1Si5Mg	3.2162.05 3.2341.01
Ti	Unalloyed	<200 HB	<700	4901, 4902, 4921, 4941		Ti 99.5, Ti 99.7,Ti 99.8	3.7024, 3.7034, 3.7065
	Alloyed	<350 HB	<1250	4911,4928, 4935, 4954, 4967		TiAl6V4, TiA16VSn2, TiAl5Sn2.5, TiCu2,	3.7115, 3.7124, 3.7154, 3.7184
Ni	Unalloyed	<150 HB	<500	Nickel 200, Nickel 270		RNi12, RNi24, RNi8	1.3911,1.3926, 1.3927
	Alloyed	<270 HB	<900	Nimonic 75, Hastelloy C, Monel 75, Inconel 600, Haynes Alloys 263		D1a, FeNi29Co17, Ni-Cr20Ti, Ni38, Ni51, NiCo15Cr10MoAlTi, NiCr16FeTi, NiCr20Co13Mo4Ti3Al	1.3913, 1.3917, 1.3928, 1.3981, 2.4360, 2.4602, 2.4650, 2.4816, 2.4983
	Alloyed	270 - 350 HB	900 - 1200	Inconel 718, Waspalloy, Nimonic 80, Rene 41

For more detailed information refer to Application Guide.