| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Metric; - Spiral Flute R40 N | | |
| | | |
| | | Standard Type Métrique - Cannelure En spirale R40 N (Type Standard) Metrico - Tagli Elicoidali R40 N Metrisch - Gewundene Flöte R40 N (Standard Typ) | | |
| | | |
| | | Sutton Tools | | |
| | | |
| | | din 371 =33 | | din 376 | | |
| | | |
| | | H3 | | |
| | | |
| | | |
| | | Material Matériel / Materiale / Werkstoffe | | |
| | | HSSE V3 | | HSSE V3 | | HSSE V3 | | |
| | | |
| | | |
| | | Special Geometry Géométrie Spéciale / Geometria Spéciale / Spezielle Geometrle | | |
| | | R40-6G | | R40-4H | | R40-Left Hand | | |
| | | |
| | | |
| | | Colour Ring & Application Anneau Et Application De Couleur / Colore dell' anello e applicazione / FarbencRing II.-ANWENDUNG Limit & Nut Tolerance Limite Et Tolérance D'Écrou / Tolleranza / Begrenzung U. NußcToleranz | | General Purpose General Purpose General Purpose | | |
| | | |
| | | ISO 3 / 6G | | ISO 1 / 4H | | ISO 2 / 6H | | |
| | | |
| | | |
| | | Chamfer Chanfrein / Imbocco / Abschrägung | | Form C / 2.5 x P | | Form C / 2.5 x P | | Form C / 2.5 x P | | |
| | | |
| | | |
| | | Catalogue Group Groupe De Catalogue / Gruppo Del Catalogo / KatalogcGruppe | | D0402 | | D0402 | | D0402 | | |
| | | M | | |
| | | |
| | | |
| | | Brt | | Brt | | Brt | | |
| | | Surface Finish Finition Extérieure / Finitura Superficiale / OberflächencEnde | | |
| | | |
| | | |
| | | |
| | | Item # Price Item # Price | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | DIN 371 | (Reinforced efe) | | | | | | | | | | | | | M 2 | x 0.4 | 45 | 8 | - | 2.8 | 2.1 | 5.0 | 2 | 1.6 | €16.20 | 398921 | €16.20 | 399058 | | | | | | M 2.2 | x 0.45 | 45 | 9 | - | 2.8 | 2.1 | 5.0 | 2 | 2.0 | | | | | | | | | | M 2.3 | x 0.4 | 45 | 9 | - | 2.8 | 2.1 | 5.0 | 2 | 2.1 | | | | | | | | | | M 2.5 | x 0.45 | 50 | 9 | - | 2.8 | 2.1 | 5.0 | 2 | 2.05 | €18.40 | 398938 | €18.40 | 399065 | | | | | | M 2.6 | x 0.45 | 50 | 9 | - | 2.8 | 2.1 | 5.0 | 2 | 2.15 | | | | | | | | | | M3 | x 0.5 | 56 | 5 | 18 | 3.5 | 2.7 | 6.0 | 3 | 2.5 | €16.40 | 398945 | €16.40 | 399072 | €29.80 | 399188 | | | | M 3.5 | x 0.6 | 56 | 6 | 20 | 4.0 | 3.0 | 6.0 | 3 | 2.9 | | | | | | | | | | M 4 | x 0.7 | 63 | 7 | 21 | 4.5 | 3.4 | 6.0 | 3 | 3.3 | €16.40 | 398952 | €16.40 | 399089 | €29.80 | 399195 | | | | M5 | x 0.8 | 70 | 8 | 25 | 6.0 | 4.9 | 8.0 | 3 | 4.2 | €16.40 | 398969 | €16.40 | 399096 | €29.80 | 399201 | | | | M6 x 1 | 80 | 10 | 30 | 6.0 | 4.9 | 8.0 | 3 | 5.0 | €16.40 | 398976 | €16.40 | 399102 | €29.80 | 399218 | | | | M7 x 1 | 80 | 10 | 30 | 7.0 | 5.5 | 8.0 | 3 | 6.0 | | | | | | | | | | M 8 | x 1.25 | 90 | 13 | 35 | 8.0 | 6.2 | 9.0 | 3 | 6.8 | €18.70 | 398983 | €18.70 | 399119 | €34.00 | 399225 | | | | M 10 | x 1.5 | 100 | 15 | 39 | 10.0 | 8.0 | 11.0 | 3 | 8.5 | €21.60 | 398990 | €21.60 | 399126 | €39.20 | 399232 | | | | DIN 376 | (Reduced d2) | | | | | | | | | | | | | | M3 | x 0.5 | 56 | 5 | - | 2 | - | - | 3 | 2.5 | | | | | | | | | | M 3.5 | x 0.6 | 56 | 6 | - | 3 | 2.1 | 5.0 | 3 | 2.9 | | | | | | | | | | M4 | x 0.7 | 63 | 7 | - | 3 | 2.1 | 5.0 | 3 | 3.3 | | | | | | | | | | M5 | x 0.8 | 70 | 8 | - | 4 | 2.7 | 6.0 | 3 | 4.2 | | | | | | | | | | M6x1 | 80 | 10 | - | 5 | 3.4 | 6.0 | 3 | 5.0 | | | | | | | | | | M8 | x 1.25 | 90 | 13 | - | 6 | 4.9 | 8.0 | 3 | 6.8 | | | | | | | | | | M 10 | x 1.5 | 100 | 15 | - | 7 | 5.5 | 8.0 | 3 | 8.5 | | | | | | | | | | M 12 | x 1.75 | 110 | 18 | - | 9 | 7.0 | 10.0 | 3 | 10.2 | €28.10 | 399003 | €29.50 | 399133 | €51.00 | 399249 | | | | M14 | x2 | 110 | 20 | - | 11 | 9.0 | 12.0 | 3 | 12.0 | €36.50 | 399010 | €38.30 | 399140 | €66.20 | 399256 | | | | M16 | x2 | 110 | 20 | - | 12 | 9.0 | 12.0 | 3 | 14.0 | €41.30 | 399027 | €43.40 | 399157 | €75.00 | 399263 | | | | M 18 | x 2.5 | 125 | 25 | - | 14 | 11.0 | 14.0 | 4 | 15.5 | €55.50 | 399034 | €58.30 | 399164 | €100.80 | 399270 | | | | M 20 | x 2.5 | 140 | 25 | | 16 | 12.0 | 15.0 | 4 | 17.5 | €60.40 | 399041 | €63.50 | 399171 | €109.80 | 399287 | | | | Work Piece Material / Materie! D'Objet / Materiale Del Pezzo in lavorazione / Werkstücke Werkstoffe | | Vc (m/min) | Vc (m/min) | Vc (m/min) | | | | Steel / Acier / Acciaio / Stahl | ~900N/mm2 | 5 - | 10 | 5 - | 10 | 5 - | 10 | | | | Grey Cast Iron / Fer De Fonte Gris / Ghisa Grigia / Graues Roheisen | ~700N/mm2 | 10 | 15 | 10 | 15 | 10 | - 15 | | | | Aluminum Alloys / Alliages D'aluminium / Leghe Di Alluminio / Aluminiumlegierungen | -SI 10% | 10 | 15 | 10 | 15 | 10 | - 15 | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Application Notes 1. The speeds listed above are a recommendation only, speeds should be adjusted on application / Les vitesses énumérées ci-dessous sont un recommendation seulement, des vitesses devraient être ajustées sur l'application / Le velocita' riportate sono indicative e devono essere impostate a seconda della lavorazione. / Die Geschwindigkeiten, die nachstehend aufgeführt werden, sind nur ein recommendation, Geschwindigkeiten sollten auf Anwendung justiert werden | | |
| | | |
| | | 2. Taps must be driven off square to eliminate slippage / Les robinets doivent être à angle droit éliminé au patinage d'eliminate / I maschi devono essere fissati in macchina tramite l' apposito quadro per evitare lo slittamento. / Hähne müssen abgetriebenes Quadrat zum eliminateabrutschen sein | | |
| | | |
| | | 26 | | |
| | | |
| | | www.sutton.com.au | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |