Catalogs >
Sunnen Products Company >
X-SP-9003: Dial Bore Gages

X-SP-9003: Dial Bore Gages
8Pages

Catalog excerpts

ABOVE AND BEYOND HONING DIAL BORE GAGES

The Sunnen System . . . It’s complete The idea of a dial bore gage has always been good. And now, Sunnen® has put together a complete Dial Bore Gaging System that does a lot of good things the gage could never do alone. From setup to readout this system helps you gage inside diameters to within tenths metric versions 0,002mm) with less fuss and more confidence than ever before. Five .0001" reading Gages and two master Setting Fixtures cover all bores from .054"-8" (1,37 mm-203 mm). The G-822A Gage extension kit allows measurement of bores from 6"-12" (152,4 mm-304.8 mm). Consult your Sunnen...

Open the catalog to page 2

Sunnen features make this the Dial Bore Gage you trust Shock-Shield protects dial from hand heat and jarring to help assure reliable readings. Press here. Gage head retracts. Gage head slips easily in and out of interrupted holes. Adjustable centralizers for proper centralization over entire diameter range. One twist adjusts gaging tension so head goes smoothly in and out of any size hole. Note: Models GR-3000 and GRM-3000 for small bores from .054" (1,37 mm) to .535" (13,59 mm) operate on a probe and transfer pin design rather than the centralizer design described above. All standard...

Open the catalog to page 3

The Gages Standard Sunnen Dial Bore Gages read out in tenths (metric versions 0,002 mm). Models are also available that read out in five-tenths (metric version 0,010 mm). All models (except GR-3000 and GRM-3000) feature all-carbide gaging points, wear-proof ball crank, and adjustable centralizers. Each gage comes packed in its own sturdy box with all tools and wrenches required for setup and adjustment. Note: For the Sunnen Digital Dial Bore Gage, Just add “E” to the suffix of the gage part number (i.e. GR-2245E). Diameter Range inches Max. Gaging Depth inches Overall Length inches Model...

Open the catalog to page 4

Gages for bores as small as .054" (1,37 mm) Sunnen offers a Dial Bore Gage for checking a wide range of extra small bores. It can be set on any .00001" increment from .535" diameter all the way down to .054" (13,59 mm to 1,37 mm). Size is set with the standard Sunnen CF-502 Setting Fixture used with .5" to 2" (12,7 mm to 50,8 mm) dial bore gages. This small-bore gage gives you all the features and benefits that have made Sunnen Dial Bore Gages so popular in shops of all kinds . . . worldwide. GR-3000 Dial Indicator Assembly Consists of a tenth reading indicator, probe retractor and probe...

Open the catalog to page 5

The Setting Fixtures Sunnen’s unique Setting Fixtures multiply the usefulness of the Dial Bore Gages many times over. Two models combine to cover a continuous range of .054" to 8" in .0001" increments (1,37 mm to 150 mm in 0,002 mm increments). Both models feature a heavy stress-relieved cast iron base, lapped carbide micrometer anvils, and built-in magnifier for fast, accurate setup. Each Setting Fixture comes with its own master calibrating ring. Model CF-502 Setting Fixture, shown with GR-6241 Gage. For 2.000" to 8.000" diameters — Model CF-1126 combines a large micrometer head and four...

Open the catalog to page 6

GR-3000 Probes and Transfer Pins Diameter Range inches Maximum Overall Transfer Gaging Depth Length Pin # inches mm inches mm GR-3000 Probe Kits Probe kits to cover the more popular diameters are available as listed below. Both kits are supplied in a hinged, nested box. Probe Kit G-3025 Consists of 15 probes and 2 transfer pins. Covers a continuous diameter range from .165" to .535" (4,2 mm to 13,6 mm ). Probe # Diameter Range inches Probe Extension* Available for probes .323" (8,2 mm) or larger. Probe extensions are 2-1/2" (63,5 mm) long, and up to three can be assembled together. Part...

Open the catalog to page 7

A Legacy of Excellence since 1924. WORLDWIDE Our global manufacturing, distribution, and sales and service network allows us to deliver quality Sunnen solutions worldwide. And our state-of-the-art Technical Services Centers allow our technical experts to develop innovative solutions to customer application challenges. The Centers also provide answers for customer questions and trainingfor Sunnen representatives around the world. Sunnen Products Company World Headquarters St. Louis, MO – USA Phone 1.314.781.2100 Fax 1.314.781.2268 Toll Free 1.800.325.3670 Email sunnen@sunnen.com...

Open the catalog to page 8

X-SP-9003: Dial Bore Gages 8Pages

Catalog excerpts

All Sunnen Products Company catalogs and technical brochures

X-SP-9003: Dial Bore Gages
8Pages