Catalogs >
Sunnen Products Company >
HTB - S Series

HTB - S Series
8Pages

Catalog excerpts

ABOVE AND BEYOND HONING HTB-S Series S m a l l Pr o duc t i o n Tube H on e

SUNNEN’S HTB-S SERIES . . . THE RESULT OF DECADES O The Sunnen HTB-S Series tube hone is the perfect solution for job shops in need of a ﬂexible systems for small production applications and repair work. The HTB-S Series is ideal for hydraulic cylinders, aircraft components and compressor components. The HTB is available in seven models from the HTB-2000S [featuring a 2-meter (6.56 ft) stroke] up to the HTB-10000S [featuring a 10,000 meter (33 ft.) stroke]. These systems are designed for bore diameters up to 400 cm (13 in.

Open the catalog to page 2

OF TUBE HONING EXPERIENCE The HTB-S Series is a medium-duty tube hone the combines the best features of other Sunnen tube hones. Precision sizing and ﬁnishing of long and large bores has never been easier or more productive. The ﬁeld-proven features of the HTB-S Series include: • • • • • An easy and reliable Stober drive spindle A stroking servo motor with the proven power to match the spindle drive The familiar V-type ﬁxture that is used The proven Sunnen MPS feed system Touch screen display simpliﬁes setup storage for more than 100 setups Your Sunnen Technical Specialist will work with...

Open the catalog to page 3

The HTB features the most advanced technology available to make your job easier and more productive Features That Make The HTB-Series Ideal for Sizing and Finishing Big Bores Spindle Load Meter for Peak Efficiency Built-in load meter indicates high and low spots in the tube bore. Operator can adjust the stroke as required for optimum cycle time. Easy-to-Set Stroke Stops “Blind Hole” Capabilities This feature makes setup quick and easy. The tool can Work out tight spots in the bore when using the Short Stroke Cycle and Stroke Dwell features. Adjustable Workholding Fixture Accurately position...

Open the catalog to page 4

Easy-to-read PLC touchscreen display simplifies setups and operation. Digital Display and PLC Control The easy-to-read display shows machine status. View conditions such as spindle motor load and spindle carriage reaction. The PLC controls the stroke direction consistently smooth stroke reversals. Dwell Features and Manual Reversal The touch of a button allows the operator to dwell the stroke anywhere in the workpiece. Manual reversal of the stroke can take place anywhere in the workpiece. Manual Mode Use this mode for honing a workpiece for the first time. Ideal for locating unknowns...

Open the catalog to page 5

• CE Optional - 1 light curtain on backside of Sp|ndle PoweR: spindle table or fence 4.7 Hp (3,5 kW) variable speed controlled Steady Rest: StrokE: • Standard on HTB-6000s - HTB-10000s. 4.3 Hp (3,2 kW), servo standard • Optional on HTB-2000s - HTB-4000s. Stroke Speed Range: .32 - 131 ft/min (1 - 40 m/min) Bore Diameter Range: 1 - 13.8 inches (25 - 350 mm)* *For diameter sizes above 13.8 inches (350 mm), contact your Sunnen Field Engineer. Approximate Stock Removal Rate: up to 24.4 in3/hr (400 cmVhour)* *Actual stock removal rates will vary depending upon application. O.D. Capacity -...

Open the catalog to page 6

Tooling The HTB-S is compatible with Sunnen’s MPS Modular Tool System Sunnen’s MPS Modular Tooling. With the MPS you can convert any “big work” honing machine into a new bore ﬁnishing system and you can “tailor” tooling to ﬁt your jobs. Sunnen’s MPS Modular Tooling can handle from 25.1 mm to 381 mm (.990” to 15.00”) inside diameters and up to 3.65m (12’) in length. With the cage assembly and stone and guide extension set the HTB-S with MPS tools can handle diameters up to 650 mm (25,590 in.) All components are standard and interchangeable and most are available from stock for immediate...

Open the catalog to page 7

WORLDWIDE Our global manufacturing, distribution, and sales and service network allows us to deliver quality Sunnen solutions worldwide. And our state-of-the-art Technical Services Centers allow our technical experts to develop innovative solutions to customer application challenges. The Centers also provide answers for customer questions and training for Sunnen representatives around the world. Sunnen Products Company World Headquarters St. Louis, MO – USA Phone 1.314.781.2100 Fax 1.314.781.2268 Toll Free 1.800.325.3670 Email sunnen@sunnen.com www.sunnen.com Austria - Sunnen Austria GmbH...

Open the catalog to page 8

HTB - S Series 8Pages

Catalog excerpts

All Sunnen Products Company catalogs and technical brochures

HTB - S Series
8Pages