Catalog excerpts
Retractable Mandrels The Sunnen KR and BLR series of honing mandrels with retractable stone assemblies ensure greater efficiency in virtually all bore sizing and finishing operations. Mandrel Adapter The new retractable KR mandrel series is available for diameter ranges from .185"-.744" (4,70-18,90 mm). The longer BLR series of retractable mandrels is also available for the same diameter range, and incorporates a longer stone. Stone Wedge Wedge Guide Retractable Mandrel Options Diamond Plated Super Mandrels — Designed to provide a long-wearing guide shoe to increase mandrel life in some applications…plus faster stock removal in difficult materials (chrome, carbide). Plated with 220 grit diamond. Available 4-6 weeks after receipt of order. Retractable mandrel and stone assemblies are available at the same price as the nonretractable mandrel units. Carbide Shoe Mandrels — (Available on Special Order) Two types of Carbide Shoe Mandrels are available for highproduction applications. Available in either Round Carbide Rod Inserted and Full Carbide Shoe Mandrels. In the correct application they will last significantly longer than standard hardened mandrels and prevent galling in exotic materials such as 303 stainless steel. When ordering full-carbide type specify starting and finish diameter. Available 4-6 weeks after receipt of order. Benefits of Sunnen’s Retractable Mandrels: • Stones are retracted from the cutting position for much easier loading and unloading of parts which increases production and lowers manufacturing costs. • Stronger mandrels remove stock at a faster rate, increasing production speeds and lowering cost per part honed. Extended Shank Mandrels — (Available on Special Order) Extended Shank Mandrels are available for honing parts that are too long to be honed with a standard mandrel. Available 4-6 weeks after receipt of order. • Units come with extended wear surfaces (shoes) standard, in either hard steel or plated diamond. This ensures longer service life and significantly reduces centerline changes from cycle to cycle. Also, downtime is lowered which increases productivity and reduces unit costs. Metal Bond Superabrasive Insert Mandrels — (Available on Special Order) For applications where a long lasting mandrel is needed and the materials being honed reacts negatively with either a hardened or carbide shoe mandrel. Single or double insert mandrels in either Borazon/CBN or diamond are available. Available 4-6 weeks after receipt of order. • Mandrel units have hardened wedges to prolong wedge life. This assures high performance honing from start to finish for better cost efficiency. • The stone retraction feature is ideal for use in automated applications facilitating loading and unloading, reducing labor costs. • Retraction marks and scratches that can occur when taking the part off the mandrel after honing are greatly minimized. This ensures a consistently higher-quality end product. How To Order To order a retractable KR-16 or BLR-16 13,36 mm - 14,15 mm (.526"-.557") diameter mandrel, simply add “R” after the “K” or after the “BL from the corresponding table on pages 20 - 42 in this catalog. SEE EXAMPLE BELOW (from page 36 of catalog): ” Order 1-5 For Complete K16 or J-K16 Honing Units Diameter Range 12,57 mm - 15,72 mm .495" - .619" mm * H = hardened steel SD = diamond plated K16 Mandrel* Includes wedge Mandrel With Standard Shank Choose One Suffix J-K16 Mandrel* Includes wedge Steel Mandrel With Extra-Long Shank Truing Sleeve For J-K16 mandrels order J-K16-A adapter Alignment Bushing With stone retainer and wedge guide For machines with fully adjustable spindle nose Honing Stone☛ Contact Customer Service For Availability
Open the catalog to page 1Mandrels & Stone Kit Accessories LN-610 Stone Selection Kit LN-650 Mandrel Storage Cabinet A sturdy all-steel cabinet for conveniently storing Sunnen Mandrel supplies and accessories. The upright cabinet provides storage for 112 complete mandrel assemblies from D2 through Y32 sizes. The lower cabinet consists of three shelves which can be used for storage of larger mandrels as well as related supplies. Shipped assembled. Ready to use. Dimensions: 1701 mm (67") Height 889 mm (35") Width 610 mm (24") Depth Shipping Weight: 135 kg (297 lbs.) A complete assortment of Sunnen Precision Graded...
Open the catalog to page 2All Sunnen Products Company catalogs and technical brochures
-
SV-30 series
8 Pages
-
SV-15
8 Pages
-
Portable Hones and Accessories
20 Pages
-
DH SERIES
8 Pages
-
SV-2400 Series
8 Pages
-
Precision Honing Supplies
203 Pages
-
SHDD Series
8 Pages
-
PG Bore Gaging System
8 Pages
-
CGT KROSSGRINDING®
14 Pages
-
Portable Hones
34 Pages
-
GHSS GHTS
16 Pages
-
corporate brochure
16 Pages
-
Small Engines
5 Pages
-
Cylinder Liners
5 Pages
-
Gears
5 Pages
-
Hydraulics
5 Pages
-
Fuel Injectors
5 Pages
-
HTD Heavy Duty Tube Hone
4 Pages
-
HTC Series Honing
4 Pages
-
SH-6000
8 Pages
-
SH-5000
8 Pages
-
SH-4000
8 Pages
-
SSH-1680
2 Pages
-
SV-15 Vertical Hone
8 Pages
-
SV-2500 series
8 Pages
-
Engine Honing Equipment
66 Pages
-
Precision Honing Supplies
199 Pages
-
HTB - S Series
8 Pages
-
MBB-166
2 Pages
-
2C Tooling
2 Pages
-
CH-100
6 Pages
-
SHO Honing Oil
2 Pages
-
Heavy-Duty Push Tools
60 Pages
-
Portahones
6 Pages
-
GHTS GHSS Engine
4 Pages
-
MMT High Production
2 Pages
-
GNH Giant Portable Hone
1 Pages
-
X-SP-9003: Dial Bore Gages
8 Pages
-
GH Tooling Catalog
60 Pages
-
X-SP-5070: 21 Case Histories
24 Pages
-
M-series
12 Pages
-
MPS
9 Pages
-
Multi-Stone (MMT) Tools
2 Pages
-
GNH
1 Pages
-
Sunnen Portable Hones
20 Pages
-
X-SP-5061
29 Pages