Catalogs >
SULLAIR >
Sullair Drains for Compressed Air Systems Zero Air Loss andTimed Solenoid

Sullair Drains for Compressed Air Systems Zero Air Loss andTimed Solenoid
8Pages

Catalog excerpts

Sullair Drains for Compressed Air Systems Zero Air Loss andTimed Solenoid - 1

Sullair Drains for Compressed Air Systems Zero Air Loss and Timed Solenoid Ⅲ Maximize energy savings Ⅲ Minimize costly repairs Ⅲ Removes condensate, protecting your equipment Ⅲ Drains designed for every application

Open the catalog to page 1

Sullair Drains for Compressed Air Systems Zero Air Loss andTimed Solenoid - 2

Sullair Capabilities Sullair Leadership Since 1965, Sullair has been recognized around the world as an innovator and a leader in rotary screw compression and vacuum technology. For more than 40 years, Sullair has designed and manufactured its own rotors and air end assemblies at the corporate headquarters in Michigan City, Indiana. The award-winning rotary screw design sets the industry standards and delivers the quality and reliability one expects from a leader. products are known around the world for their universally applicable design, outstanding craftsmanship and superior quality....

Open the catalog to page 2

Sullair Drains for Compressed Air Systems Zero Air Loss andTimed Solenoid - 3

The Importance of Clean, Dry Compressed Air Why Do I Need a Drain? Did you know that a typical 75 horsepower compressor operating in an ambient of 75°F and 75% humidity, can produce 46 gallons of water in 24 hours? What happens to that water? Without a high quality drain, this water ends up in the plant air system as well as the equipment fed by the air system. All of this water then causes rust and corrosion which creates high repair and maintenance costs! Water Jeopardizes Everything You Want Your Compressed Air System to do. It Ruins Product and Fouls Processes. • In addition to water,...

Open the catalog to page 3

Sullair Drains for Compressed Air Systems Zero Air Loss andTimed Solenoid - 4

The Ultra – Zero Air Loss Drain The Ultra is designed to remove condensate from compressors and dryers up to 3600 scfm capacity. The operation is automatic and there is zero air lost during the condensate discharge cycle. The Ultra also offers many programmable features to allow it to be customized to the application. Alarm contacts can be programmed N.O. or N.C. Service alarm interval can be set, anti-air lock feature can be The Maxi – Zero Air Loss Drain The Maxi is designed to remove condensate from compressors and dryers up to 3000 scfm capacity. It also matches up nicely with large...

Open the catalog to page 4

Sullair Drains for Compressed Air Systems Zero Air Loss andTimed Solenoid - 5

115 VAC or 230 VAC 1/2" npt 1/2" npt or 3/8" hose barb 230 psi 122°F 35°F 3600 cfm 80 gph NEMA 4/IP65 Voltage Inlet connection Outlet connection Maximum pressure Maximum temperature Minimum temperature Maximum compressor capacity Maximum drainage capacity Electrical protection rating 115 VAC or 230 VAC 1/2" npt 1/2" npt or 3/8" hose barb 230 psi 140°F 35°F 3000 cfm 60 gph NEMA 4/IP65 Voltage Inlet connection Outlet connection Maximum pressure Maximum temperature Minimum temperature Maximum compressor capacity Maximum drainage capacity Electrical protection rating Inlet connection Outlet...

Open the catalog to page 5

Sullair Drains for Compressed Air Systems Zero Air Loss andTimed Solenoid - 6

All Inclusive "Peace of Mind" Warranty Sullair backs our commitment to quality with an unparalleled, non-pro-rated 5 year warranty {parts and labor) on the major components. No other manufacturer offers a warranty that is as all inclusive. (Note: a Sullair pre-filter must be installed upstream of the dryer as a prerequisite for this warranty.) Quality is Third Party Certified and Guaranteed. Dryers are manufactured in an ISO 9001 environment. PARTS & LABOR Drain Accessories Hose Pipe Connections Hose pipe connectors are a sure and simple way to install the discharge tubing. Anti-Air Lock...

Open the catalog to page 6

Sullair Drains for Compressed Air Systems Zero Air Loss andTimed Solenoid - 7

Air Quality Standards ISO 8573.1 Classes Particle (micron) size of some common substances. Eye Sight Threshold (40 micron) Fumes Tobacco Smoke Smog Oil Aerosols Solid Particle Maximum number of particles per m3 General Purpose Protection Air quality to ISO 8573.1 Quality Class 1.-.5 Oil-Free Air Air quality to ISO 8573.1 Quality Class 1.4.3 Critical Applications Air quality to ISO 8573.1 Quality Class 1.4.1 Low Dew Point Quality Class 1.2.1 Pressure Dew Point -40°F (-40°C) Extremely Low Dew Point Air quality to ISO 8573.1 Quality Class 1.1.1 Pressure Dew Point -100°F (-73°C) FXF

Open the catalog to page 7

Sullair Drains for Compressed Air Systems Zero Air Loss andTimed Solenoid - 8

Sullair’s Compressed Air Products www.sullair.com Fundamental to Sullair’s leadership is a dedication to reduce not only the amount of natural resources consumed to create energy, but to minimize environmental impact, in both the manufacture and use of all our products. We are constantly exploring new ideas and seeking new technologies to meet the ever-increasing need for high quality, energy-efficient compressed air products and environmental sustainability. © Copyright 2013 Sullair. All rights reserved. The color green is a registered trademark of Sullair. Specifications subject to change...

Open the catalog to page 8