Group: UTC
Catalog excerpts
Sullair Air Tools We have the right tool for your job. Applications • Light chipping • Overhead fine detail and restoration work • Horizontal and overhead applications • Industrial applications • Cutting and driving large rivets • Heavy duty demolition work • Breaking light concrete and other light jobs • Setting anchors • Light horizontal demolition work • Concrete bridge decks and general demo work • Concrete road breaking and other general demo work • Heavy demo work breaking tough, reinforced concrete • Excavation of clay and hardpan • Light horizontal demolition work • Medium demolition work • Drilling holes in concrete and bricks • Compacting backfill in ditches, trenches, foundations and around poles • Drill for depths up to 6 feet and 1–1/2" diameter • Drill for depths up to 10 feet and 1–3/4" diameter • Drill for depths up to 20 feet and 2" diameter • Drill for depths up to 25 feet and 3" diameter
Open the catalog to page 1We Have the Right Sullair Tool forYour Tough Job Applications Sullair Model Light Chipping Hammer Chipping Hammer Rivet Buster • Breaking light concrete and other light jobs Light Paving Breaker • Concrete bridge decks and general demo work Light Paving Breaker • Concrete road breaking and other general demo work Medium Paving Breaker Heavy Paving Breaker Light Demolition Tool Medium Demolition Tool • Excavation of clay and hardpan • Light horizontal demolition work Medium Digger • Compacting backfill in ditches, trenches, foundations and around poles Backfill Tamper • Setting anchors •...
Open the catalog to page 2Sullair’s Paving Breakers are Designed to Work Better and Last Longer The Sullair Paving Breakers are Designed for Work Efficiency and a Long and Trouble-Free Life High-Wear Parts Reduced The Sullair breakers have eliminated most high-wear parts. Fewer parts mean less wear, less maintenance, and less downtime. No Tappet System Unlike conventional breakers, Sullair breakers have no multi-part tappet system. With no tappet system, which requires three independent impacts, noise is also reduced. One-Piece, Non-Protrusive Housing A leak-proof air cushion forms at the end of the piston stroke...
Open the catalog to page 3Sullair’s Anti-Vibration Paving Breaker Sullair’s ergonomically designed paving breaker features a hinged anti-vibration handle that reduces up to 60% of vibrations to the operator without loss of power. By absorbing the shock, the anti-vibration handle reduces operator fatigue, lessens stress to the upper back and shoulders, and ultimately promotes productivity. Researching Breaker Vibration This handle design is based on research conducted by evaluating the stresses of paving breakers then in existence, Sullair found that the vibrations (often identified as kickback) came from pressure...
Open the catalog to page 4Paving Breaker Design Specifications Model MPB-90A Air Inlet Shipping Weight NPT lbs 3⁄4" 97 1 – Flex handle anti-vibration 2 – Super silent 3 – Flex handle anti-vibration and super silent
Open the catalog to page 5Sullair Chipping Hammers are Built to Last Four Bolt Backhead This unique design reduces handle breakage. The common problem of a threaded handle-to-barrel connection coming loose and damaging the handle and internal parts has been eliminated. Choice of Retainers Oval collar retainers are included as standard. Universal ball type and round collar are also offered. Ball type retainers offer a quick and easy way to change steel. Simply pull the retainer back, insert the steel, and release the retainer to lock the steel in place. Round collars offer more contact area for retention and are...
Open the catalog to page 6Chipping Hammer Design Specifications Model Impact Rate Blows per Minute 3600 Chuck Size .680 round .580 hex .680 round .580 hex .680 round .580 hex .680 round .580 hex .680 round .580 hex .680 round .580 hex MCH-3S and MCH-4S Screw-on Retainer No Springs
Open the catalog to page 7Sullair Drills are Designed for Performance and Operator Protection Dead Man Safety Handle The Sullair drills are designed so that the tool automatically stops operating when the operator releases the throttle lever. One Control for Drilling and Blowing The single throttle lever controls all tool functions from off, to blowing only, to progressive drilling speeds. Variable Throttle Control Allows step less speed control for maximum drilling production. Continuous Hole Cleaning Blowing air is directed through the drill rod at all drilling speeds to clear debris from the hole. Direct Rotation...
Open the catalog to page 8Drilling Hammer Design Specifications Model MRD-9 Air Consumption Air Inlet Shipping Weight cfm NPT lbs 3⁄8" 21 10 53
Open the catalog to page 9The Sullair MRD-55 and MRD-60 Rock Drills MRD-55 is An All-Purpose, Heavy Duty Rock Drill for Holes Up to 20 feet Deep in the Hardest Rock • Fast rotation for high productivity • Swivel air and water inlet connection • Minimal parts convert drill from dry for general drilling to wet for dustless drilling Continuous Hole Cleaning Blowing air is directed through the drill rod at all drilling speeds to clear debris from the hole. MRD-60 Provides 200 rpm Rotation and a Heavy Down Force of 60 lbs for Ease of Penetration in Hard Rock • Swivel air inlet connection • Two drilling speeds • Exhaust...
Open the catalog to page 10Sullair Rivet Busters The Power for Cutting Off Large Rivet Heads, Heavy Duty Chipping and Concrete Breaking Applications Include: • Bridge jobs • Steel structure maintenance • Railroad car repair • Shipyards • Petrochemical plants • Demolition work Muffler and Screened Inlet Bushing Standard Provides quieter operation and filters the inlet from contaminating particles. Interchangeable Parts Provide Flexibility Interchangeable parts (except cylinder) reduce inventory and increase parts versatility. Simplified Control Valve Allows for smoother operation in dirty conditions through precisely...
Open the catalog to page 11Sullair MDT-22 and MDT-30 Demolition Tools Two Bolt Backhead This unique design reduces handle breakage. The common problem of a threaded handle-to-barrel connection coming loose and damaging the handle and internal parts is therefore eliminated. D-Handle The strong “D” configuration is large enough to provide a comfortable, sure grip even for a gloved hand. Minimal Lubrication Required With its unique design and materials, normal oil carryover from the compressor, combined with moisture in the air, will usually provide sufficient lubrication under normal operating conditions. Smoother...
Open the catalog to page 12All SULLAIR catalogs and technical brochures
-
AWF® All Weather Fluid
2 Pages
-
The SULLAIR 900H
2 Pages
-
Sullair SRF 1/4000®
2 Pages
-
Pristine FG™
2 Pages
-
SULLAIR Two-stage
12 Pages
-
The SULLAIR 425H
2 Pages
-
The Sullair 1600
2 Pages
-
The SULLAIR 375HH
2 Pages
-
900XHH/1150XH
2 Pages
-
ES-6 S-energy
8 Pages
-
S-energy
8 Pages
-
SULLAIR Air Treatment
19 Pages
-
LS Series
20 Pages
-
The Sullair 1300H
2 Pages
-
ShopTek
4 Pages
-
Sullair 260 Series
4 Pages
-
The Sullair 375H
2 Pages
-
MBT-6 Backfill Tamper
16 Pages
-
Air Audits
2 Pages
-
OFS series
8 Pages
-
SULLAIR FD1550
4 Pages
-
SRL series
8 Pages
-
DSP series
8 Pages
-
Sullair SRF 1/4000
2 Pages
-
SULLAIR Single-stage
8 Pages
-
Centrifugal compressors
12 Pages
-
Flowlogic
8 Pages
-
S-energy
16 Pages
-
S energy
16 Pages
-
900XHH-1150XHDL
2 Pages
-
Heat Recovery—S-energy® EES
8 Pages
-
Sullair Vacuum System
8 Pages
-
1150XHH/1350XHDL
2 Pages
-
750XHH/900XHDL
2 Pages
-
TSR-20
2 Pages
-
TSR-32
2 Pages
-
DR-13
2 Pages
-
Desiccant Regenerative Dryers
12 Pages
-
DR13
2 Pages
-
DE18
2 Pages
-
TSR20
2 Pages
-
RDHL
2 Pages
Archived catalogs
-
shoptek
8 Pages
-
SULLAIR Air Treatment
30 Pages
-
ShopTek
8 Pages