| | | | | | | |
| | Stroke | XH | X-axis | mm | 500 (5=-:7jb»tt) (Table traverse) | |
| | Y» | Y-axis | mm | 400 (T-J)l&m (Table traverse) | |
| | ZH | Z-axIs | mm | 300 (□^A^B) (Column traverse) | |
| | Table | | Working area Allowable load | mm kg | 600X400 350 | |
| | | Distance from table surface to spindle nose | mm | 150-450 | |
| | | | Spindle taper | - | NT30 | |
| | £N Spindle | | Standard | min" | 12.000 5.5kWGS«SS}(ContlnuojsratiiS 12,000 2.2kW(jS{0§) (Corrtlnuous rating) | |
| | HSf±« | High speed | min" | 16.000 5.5kW 15.000 2.2kW | |
| | ^-^>r-xji/-tt« | Coolant through | min" | 12,000 5.5kW 12,000 3.7kW | |
| | | HWI^fiflt | High torque | min" | 8.000 3.7kW 12.000 3.7kW | |
| | Feed | | Rapid feed rate | m/min | 40(X.Y.Z-axis) | |
| | | Cutting feed rate | m/mln | Max. 10 | |
| | | Min. programmable unit | mm | 0.001 | |
| | ME | | Positioning | mm | 0.004 (£7.hCI-;» (In full travel) | |
| | Accuracy | «bel | Repeatability | mm | ±0.001 | |
| | | | Number of tools | - | 15*(*^5/a>27*) 15(27 Optional) | |
| | | | Tool to tool | sec | 1.0 | |
| | ATC | | Tool shank | - | BT30(;7Ju*$'3'K MAS P30T-2) (Pull stud MAS P30T-2) | |
| | | Max. tool dimension | mm | $60X200 | |
| | | | Max. tool weight | kg | 2.0 (fij£ATCPS3.5) (3.5 at low speed ATC) | |
| | | | Tool selection | - | ttU—^y&k Memory random | |
| | | | WldthXLengthXHelght | mm | 1,570X2,080X2,370 | |
| | Machine | SU | Weight | kg | 2.800 | |
| | | | Power supply | - | HfflAC200V± 10%,50/BOHz 3PH AC200V±10%,50/BOHz | |
| | | | Power capacity | kVA | Max. 18 | |
| | | | Air pressure | MPa | 0.4-0.8 | |
| | | | Air consumption | l7min(ANR) | Max. 100 | |
| | | | | | | |