Text version of the page

Technical Specification

SSO50MB RF Conveyor Dryer

SSO50MB Technical Data Operator Control Panel (HMI) This system has the capacity to pre-set operating recipes for various products. The most commonly used machine settings are easily entered. The operator can select the required product by the simple push of a button. Operating Frequency 27.12MHz +/- 0.6% RF Power Output 50kW at full load RF Efficiency 67-72% at full load Cooling System Integral Closed Loop Demineralised Water Full Fault Diagnostic System If a fault occurs, the cause of the fault is immediately displayed for the operator to see. The fault display also provides information to the operator on the relevant circuit reference where the fault has occurred and gives a list of check items to help clear the fault. Primary Water Flow 53 litres/min (11.65 imperial gals/min) Primary Water Press. 4kg/sq cm (60 PSI) Primary Water Temp. 10 deg C minimum, 26 deg C maximum Electrical Supply 50/60Hz, 3 wire, Built-in Maintenance Reminders The operator screen automatically displays when maintenance should be undertaken and provides a message to the operator. Power Consumption 115kVA Operating Voltage 360-600 volts, stability within +/- 5% Compressed Air 0.043 cu.m/min at 6kg/sq cm Operational Handing Right Hand or Left Hand as required Materials Oven S/Steel, Generator Al or S/Steel Standard Specification includes Moeller Switchgear, Mitsubishi FX series PLC and E600 Operator Interface Panel (HMI). Other components can be supplied at additional cost where required (e.g. Allen Bradley, Siemens etc.). Conveyor includes pneumatic tensioning and tracking systems as standard and can be manufactured from mild steel with a painted finish, or entirely from Stainless Steel according to the requirements of the customer. The conveyor infeed section can be fitted with a retractable noser to allow product reject if required (optional at extra cost). SSO50MB Dimensional Specifications Machine Width 2030mm Machine Length (Single Zone) 5186mm + conveyor infeed and outfeed Machine Length (Double Zone) 8930mm + conveyor infeed and outfeed Machine Height 1890mm + conveyor band height Conveyor Band Height typically 800mm to 1300mm Strayfield Limited has a policy of continued improvement and reserves the right to alter specification at any time without notice. For details of guarantee refer to the Strayfield Limited Terms and Conditions of Sale.