Fortus 360mc System Specifications - Stratasys - (Version JPG) - Page n° 2 - PDF Catalogue | Technical Documentation

See other catalogues for Stratasys

Finishing machine, Prototyping machine

Text version of the page

FORTUS 360mc

R<LI

At the core:

Advanced FDM® technology

Fortus systems are based on patented Stratasys FDM — Fused Deposition Modeling — technology. FDM is the industry's leading additive fabrication technology, and the only one that uses production grade thermoplastics, enabling the most durable parts.

Fortus systems use a wide range of thermoplastics with advanced mechanical properties so your parts can endure high heat, caustic chemicals, sterilization, and high impact applications.

No special facilities needed

You can install a Fortus 3D Production System just about anywhere. No special venting is required because Fortus systems don't produce noxious fumes, chemicals, or waste.

No special skills needed

Fortus 3D Production Systems are easy to operate and maintain compared to other additive fabrication systems because there are no messy powders or resins to handle and contain. They're so simple, an operator can be trained to operate a Fortus system in less than 30 minutes.

Get your benchmark on the future of manufacturing

Fine details. Smooth surface finishes. Accuracy. Strength. The best way to see the advantages of a Fortus 3D Production System is to have your own part built on a Fortus system. Get your free part at: www.fortus.com/benchmark.

SYSTEM SPECIFICATIONS


	BASE SYSTEM CONFIGURATION
	Build Envelope (XYZ)	14 x 10 x 10 inches (355 x 254 x 254 mm)
	Material Delivery	One (1) Build material canisters 92 in³ (1508 cc) One (1) Support material canisters 92 in³ (1508 cc)
	UPGRADE CONFIGURATION
	Build Envelope (XYZ)	16 x 14 x 16 inches (406 x 356 x 406 mm)
	Material Delivery	Two (2) Build material canisters 92 in³ (1508 cc) Two (2) Support material canisters 92 in³ (1508 cc) Auto changeover between canisters
	MATERIAL OPTIONS


Layer Thickness:	ABS-M30	PC-ABS	PC
0.013 inch (0.330 mm)	X	X	X
0.010 inch (0.254 mm)	X	X	X
0.007 inch (0.178 mm)	X	X	X
0.005 inch (0.127 mm)	X	X
Support Structure:	Soluble	Soluble	BASS
Available Colors:	□ Ivory D White ■1 Black 1 Dark Grey H Red ■ Blue	■1 Black	□ White
OTHER SPECIFICATIONS
System Size	50.45 x 35.25 x 77.25 inches (1281 x 895.35 x 1962 mm)


	Achievable Accuracy	Parts are produced within an accuracy of: [± 0.005 inch] or [± 0.0015 inch/inch] whichever is greater [± 0.127 mm] or [± 0.0381 mm/mm]* whichever is greater *Note: Accuracy is geometry dependent 95% confidence rating.
	Network Communication	10/100 base T connection. Ethernet protocol.
	Operator Attendance	Limited attendance for job start and stop required.
	Operating Environment	Maximum room temperature of 85°F (29.4°C). Maximum room dew point of 78°F (25.6°C).
	Power Requirements	230 VAC, 50/60 Hz, 3 phase, 16A/phase (20 amp dedicated circuit required)
	Regulatory Compliance	CE
	Software	All Fortus systems include Insight™ and Control Center™ job processing and management software. FDM TEAM™ software for multi-system and/or multi-user operations is sold separately. Visit www.fortus.com/software for more information.

For more information about Fortus systems, materials and applications, call 888.480.3548 or visit www.fortus.com

Fortus 3D Production Systems Stratasys Incorporated

7665 Commerce Way

Eden Prairie, MN 55344

+1 888 480 3548 (US Toll Free)

+1 952 937 3000

+1 952 937 0070 (Fax)

www.stratasys.com

info@stratasys.com

Fortus 3D Production Systems Stratasys GmbH

Weismüllerstrasse 27 60314 Frankfurt am Main Germany

+49 69 420 994 30 (Tel) +49 69 420 994 333 (Fax) www.stratasys.com europe@stratasys.com

©2009 Stratasys Inc. All rights reserved. Stratasys and FDM are registered trademarks and Fortus, Real Parts, Fortus 200mc, Fortus 360mc, ⁼ortus 400mc, Fortus 900mc, Insight, Control Center and FDM TEAM are trademarks of Stratasys Inc., registered in the United States and other countries. *ULTEM 9085 is a trademark of SABIC Innovative Plastics IP BV All other trademarks are the property of their respective owners. Product specifications subject to change without notice. Printed in the USA. FORTUS 360mc 02/09

Fortus 360mc System Specifications - Stratasys - #2

Finishing machine, Prototyping machine