Catalogue - Fortus 200mc System Specifications - Stratasys - (Version JPG)

See other catalogues for Stratasys

Finishing machine, Prototyping machine

Text version of the page

FORTUS 200mc

SYSTEM SPECIFICATIONS

At the core:

Advanced FDM" technology

Fortus systems are based on patented Stratasys FDM — Fused Deposition Modeling — technology. FDM is the industry's leading additive fabrication technology, and the only one that uses production grade thermoplastics, enabling the most durable parts.

Fortus systems use a wide range of thermoplastics with advanced mechanical properties so your parts can endure high heat, caustic chemicals, sterilization, and high impact applications.

No special facilities needed

You can install a Fortus 3D Production System just about anywhere. No special venting is required because Fortus systems don't produce noxious fumes, chemicals, or waste.

No special skills needed

Fortus 3D Production Systems are easy to operate and maintain compared to other additive fabrication systems because there are no messy powders or resins to handle and contain. They're so simple, an operator can be trained to operate a Fortus system in less than 30 minutes.

Get your benchmark on the future of manufacturing

Fine details. Smooth surface finishes. Accuracy. Strength. The best way to see the advantages of a Fortus 3D Production System is to have your own part built on a Fortus system. Get your free part at: www.fortus.com/benchmark.


	SYSTEM CONFIGURATION
	Build Envelope (XYZ)	8 x 8 x 12 inches (203 x 203 x 305 mm)
	Material Delivery	One (1) Build material canister 56.3 in³ (922 cc) One (1) Support material canister 56.3 in³ (922 cc)
	MATERIAL
	Layer Thickness:	ABSp/us
	0.010 inch (0.254 mm)	X
	0.007 inch (0.178 mm)	X
	Support Structure:	Soluble
	Available Colors:	□ Ivory □ White » Olive Green ■1 Black ■ Dark Grey □ Nectarine ■ Red ■ Blue □ Fluorescent Yellow
	OTHER SPECIFICATIONS
	System Size	27 x 34 x 41 inches (686 x 864 x 1041 mm)
	Achievable Accuracy	Parts are produced within an accuracy of ±.010 inch (±.254 mm).* *Note: Accuracy is geometry dependent 95% confidence rating.
	Network Communication	10/100 base T connection. Ethernet protocol.
	Operator Attendance	Limited attendance for job start and stop required.
	Operating Environment	Recommended temperature range of 65°F - 75°F (18°C - 24°C) Relative humidity range of 30% to 70%
	Power Requirements	110-120 VAC, 60Hz, 15A dedicated circuit or 220-240 VAC, 50/60 Hz, 7A dedicated circuit
	Regulatory Compliance	CE
	Software	All Fortus systems include Insight™ and Control Center™ job processing and management software. FDM TEAM™ software for multi-system and/or multi-user operations is sold separately. Visit www.fortus.com/software for more information.

For more information about Fortus systems, materials and applications, call 888.480.3548 or visit www.fortus.com

Fortus 3D Production Systems Stratasys Incorporated

7665 Commerce Way

Eden Prairie, MN 55344

+1 888 480 3548 (US Toll Free)

+1 952 937 3000

+1 952 937 0070 (Fax)

www.stratasys.com

info@stratasys.com

Fortus 3D Production Systems Stratasys GmbH

Weismullerstrasse 27 60314 Frankfurt am Main Germany

+49 69 420 994 30 (Tel) +49 69 420 994 333 (Fax)

www.stratasys.com europe@stratasys.com

©2009 Stratasys Inc. All rights reserved. Stratasys and FDM are registered trademarks and Fortus, Real Parts, Fortus 200mc, Fortus 360mc, Fortus 400mc, Fortus 900mc, Insight, Control Center and FDM TEAM are trademarks of Stratasys Inc., registered in the United States and other countries. *ULTEM 9085 is a trademark of SABIC Innovative Plastics IP BV All other trademarks are the property of their respective owners. Product specifications subject to change without notice. Printed in the USA. FORTUS 200mc 02/09

Fortus 200mc System Specifications - Stratasys - #2

Finishing machine, Prototyping machine