Catalogue - Ultra Low Profile Single Point S215 Load Cell - Strain Measurement Devices

Untitled

+ EXC (RED)

RED WIRE

+ OUT (WHITE)

S21 5

MODEL

GREEN WIRE

BLACK WIRE

WHITE WIRE

0.055 MAX

POSITIVE LOAD DIRECTION

SPECIFICATIONS:

#4-40 UNC-2B THRU (3X)


CAPACITIES:	2, 4, AND 12 Ibf (900g,	1.8kg,	5.5kg)
RATED OUTPUT:	2mV/V NOMINAL
ZERO OFFSET:	±0.3mV/V (OPTIONAL ±%	RO)
OVERLOAD, SAFE:	200% RO
EXCITATION RECOMMENDED:	UP TO 20Vdc
BRIDGE RESISTANCE:	10,000 0 + 3%
BRIDGE CONFIGURATION:	4-WIRE CLOSED BRIDGE
INSULATION RESISTANCE:	>1000 MQ@50vDC
OPERATING TEMP. RANGE:	-40^-C TO +150^-C (200^-C	OPTIONAL)
CALIBRATED TEMP. RANGE:	-40^-C TO 125^-C
TEMP. EFFECT ON ZERO BALANCE:	±0.03%/"C (±0.017%/"F)
TEMP. EFFECT ON SPAN:	+ 0.03% READING/^-C (0.01	7%/T)
LONG TERM STABILITY:	<0.1% RO PER YEAR
NONLINEARITY:	±0.03% RO
HYSTERESIS:	±0.03% RO
NONREPEATABILITY:	<0.01% RO
CREEP, IN 20 MINUTES:	< + 0.02% RO
CLERANCE FOR WIRES AND STRAIN RELIEF:	0.055" MAX ABOVE TOP OF LOAD		CELL
ELECTRICAL TERMINATION:	32AWG TEFLON WIRE, 2.5'	LONG
DEFLECTION:	.004" ALL RANGES

0.250

-0.423-

-RECOMENDED SHIM DISTANCE FOR OVER LOAD STOP

_UNLESS QTHERWISE SPECIFIED:_

BREAK SHARP EDGES .003-.015 SURFACES TO BE SQUARE &/OR PARALLEL W/IN X/X = 1/64" .XXX = ±.005"

.X = +.030" .XXXX = +.001"

.XX = +.010" ANGLES = ±2'

STRAIN MEASUREMENT DEVICES INC.

130 RESEARCH PARKWAY, MERIDEN, CT 0645C TELEPHONE:(203)235-9330 EAX(203)235-3470

S215 OUTLINE DRAWING

3REAK SHARP EDGES .08-.4

SURFACES TO BE SQUARE &/OR PARALLEL W/IN .127 .Xmm = + 0.5mrr X.XXmm =±0.3mrr X.XXXmm =±0.15mm ANGLES = ±2'

DATE:

09/28/00

NONE

NCHES

JMG

CHECKED BY:

DES

DWG No.

SMD2551

PAGE 2 OF 2

Ultra Low Profile Single Point S215 Load Cell - Strain Measurement Devices - #1