SBS-BCT-3000/3010 LOAD BANK - Storage Battery Systems, Inc - #1

Text version of the page

Visit us at www.sbsbattery.com 1-800-554-2243 Call Monday - Friday, 8am-5pm CST The SBS Model BCT-3000 is a lightweight, DC resistive load bank contained in a small enclosure. It provides up to 150 amps loading capacity for testing utility sub-station, telecommunication, and related DC power sources at 24V or 48V DC. Specifications Capacity: Up to 150 Amps DC Load Step Resolution: 1 Amp Voltage: 24 or 48 V DC Controls: Master Load ON/OFF,12 Load Step Switches Load Elements: Helically wound chromium alloy wire; no “cool down” required; over-temperature protected Blower Power: 110 Vac, 60hz with line cord or DC-powered version listed Weight: 30 pounds ARO BCT-5000 Battery Capacity Tester 150 Amp DC Resistive Load Bank (24V, 48V, or 120V) Built-in Protection The over-voltage and over-temperature protection components coupled with load elements extend instrument life and system reliability by operating at less than 50% of the maximum temperature rating. Additionally, the automatic under-voltage trip keeps cells from being damaged during testing. Features: �¡ Tests 24V/48V/120V DC power sources �¡ Use with wet or sealed batteries �¡ Built-in digital meter with 1% full scale accuracy �¡ Rated for continuous operation – no cool-down period �¡ Master switch instantly applies/removes loads �¡ Operates conveniently and quietly BCT-5000 Includes: �¡ 15-foot quick-disconnect test cables �¡ Operating instructions The only way to know your industrial batteries will perform to specification is to test them regularly. SBS’s battery capacity testers enable you to test your wet or sealed batteries in a variety of ways and at three voltages. Load bank test 24V, 48V, or 120V DC systems with currents up to 171 amps. A built-in digital meter lets you read volts, amps, amp-hours, and elapsed time without having to hook up a separate meter. The display is accurate to 1% of full scale at the rated voltages. The unit also offers continuous operation, so there’s no cool down needed after or between tests. Use the master load control switch to instantly apply or remove loads. Specifications Capacity: 12V/24V/105V DC to 150A; 24/48/120V DC to 171A Load Steps: Six load-step resolution in 5 Amp increments (5-50A) Load Elements: Chromium alloy wire Under voltage Trip: Automatically removes load if voltage drops below 19.2 /38.4 / 96 Vdc) Voltage: 24V/48V/120V DC Blower/Control Power 110 Vac, 60hz (optional 220 Vac, 50hz) Size/Weight: 16.8 x 21.25 x 24.25” HWD (42.7 x 54 x 61.6 cm) 75 lbs. (34 kg) Ordering Information Part No. Description BCT-5000 DC load bank - 24,48 & 120Vdc - 150A Ordering Information Part No. Description BCT-3000 DC load bank w/AC fans - 24 & 48vdc - 150A BCT-3010 DC load bank w/DC fans - 24 & 48vdc - 150A BCT-3000 Lightweight 24V, 48V DC Resistive Load Bank