Text version of the page

Stonshield Undercoat 0.66 carton containing:6 foil bags of Part A(curing agent)6 poly bags of Part B (resin)0.66 boxes of Undercoat Filler

Stontec ERF Product Data - 12640 STONTEC ERF

Stontec Vinyl Flake

PRODUCT DATA

0.33 box of brightly colored vinyl flakes Stonshield Sealer 1 carton containing:6 foil bags of Part A(curing agent) 6 poly bags of Part B (resin) COVERAGE Each unit of Stontec ERF will cover approximately 200 sq. ft./18.6 sq. m of surface at a 2 mm nominal thickness. STORAGE CONDITIONS PRODUCT DESCRIPTION Store all components of Stontec ERF between 60 to 85ËšF/16 to 30ËšC in a dry area. Avoid excessive heatand do not freeze. The shelf life is 3 years in the original, unopened container. PHYSICALCHARACTERISTICSTensile Strength Stontec ERF is a nominal 2 mm seamless flooring system comprised of: Stonshield Aggregate Hardness Bond Strength . . . . . . . . . . . . . . . . . . . . . . . . 85 to 90(ASTM D-2240, Shore D) . . . . . . . . . . . . . . . . . . . . >400 psi(ASTM D-4541)(100% concrete failure) . . . . . . . . . . . . . . . . . . 5,200 psi(ASTM C-307) Brightly colored quartz broadcast Impact Resistance Abrasion Resistance Cure Rate . . . . . . . . . . . . . 12 hours for foot traffic(@ 77ËšF/25ËšC)24 hours for normal operations . . . . . . . . . . . . . . >160 in./lbs.(ASTM D-2794) ...0.06 gm max. weight loss(ASTM D-4060, CS-17) Stonshield Undercoat Athree-component, solvent free epoxy undercoat consisting of resin, curing agent and filler Stontec Vinyl Flakes Coefficient of Friction (Dry) . . . . . . . . . . . . . 0.79(ASTM F-1679) Brightly colored, vinyl flakes Thickness OPTIONS Toprovide for an integral seal at the joint between the floor and the wall, cove bases in heights from 2 to 6 in./5 to 15 cm are available. For areas requiring increased thickness, a 1/8 to 3/16 in./0.31 to 0.47 cm of epoxy mortar may be added. PACKAGING Slip Resistance Index (Wet) . . . . . . . . . . . . . 0.65(ASTM F-1679) Stonshield Sealer Cove Base Stontec ERF is packaged in units for easy handling. Each unit consists of: Atwo-component, solvent free, high performance, UV resistant, clear epoxy sealer Stonshield Aggregatre USES, APPLICATIONS SUBSTRATE 2 bags of colored quartz aggregate Applications vary from light manufacturing, such as food and pharmaceutical processing to laboratories, hallways, offices and holding areas in healthcare, educational and correctional facilities. Stontec ERF is suitable for application over properly prepared concrete that does not require renovation. In most cases, this will be new or very smooth concrete. Not recommended over wood, brick, tile, asphalt, mastic, gypsum based products or painted surfaces. These must first be removed by mechanical means prior to priming and overlayment.
Note: The above physical properties were measured inaccordance with the referenced standards. Samples of the actual floor system, including binder and filler, wereused as test specimens.