Stonlux AT Product Data - Stonhard - #1

I L

Stonlux AT is a seamless, self-leveling, conductive floor system that provides outstanding static control properties along with the high performance and dura­bility associated with Stonhard flooring systems. Stonlux AT provides a smooth, easy to clean surface and has excellent chemical and abrasion resistance. This system can be applied at a thickness of 2 mm or 3 mm and is offered in two resistance ranges, ATK and ATM (see System Options). Stonlux AT is avail­able in 6 standard colors with custom colors available upon request. The Stonlux AT system is comprised of:

A two-component, penetrating epoxy primer

A three-component, thixotropic, pigmented epoxy primer

A two-component, static dissipative or conductive epoxy primer

Ensures conduction and dissipation of electricity Stonlux AT

A three-component, self-leveling, epoxy formulation consisting of resin, curing agent and selected, graded aggregates that provide conductivity throughout the flooring system

Stonlux AT flooring systems can be used in most applications where static electricity must be con­trolled. It is especially applicable in electronics manu­facturing, packaging, assembly and test facilities, and in installations of highly sensitive electronic equip­ment. Since Stonlux AT is seamless and easy to maintain, it is ideal for clean environments. Stonlux AT is also perfect for static control applications, which require good chemical, impact and abrasion resistance.

Tensile Strength.................. 2,250 psi

(ASTM C-307)

Flexural Strength................. 4,200 psi

(ASTM C-580)

Flexural Modulus of Elasticity.....3.8 x 105 psi

(ASTM D-790)

Hardness........................70 to 80

(ASTM D-2240, Shore D)

Bond Strength....................>400 psi

(ASTM D-4541) (100% concrete failure)

Abrasion Resistance . . 0.10 gm max. weight loss (ASTM D-4060, CS-17)

Coefficient of Friction (Dry*)............0.76

(ASTM F-1679)

of Linear Expansion........5.3 x 10^-5 in./in.C

(ASTM C-531)

Water Absorption ....................0.3%

(ASTM C-413)

Heat Resistance Limitation........140F/60C

(continuous exposure)

200°F/93°C

(intermittent spills) Cure Rate .............24 hours for initial set

(@ 77°F/25°C) 48 hours for light traffic

72 hours normal operations

Note: The above physical properties were measured in accordance with the referenced standards. Samples of the actual floor system, including binder and filler, were

used as test specimens.

*Due to the smooth nature of this product, Stonlux AT is

only recommended in dry environments.

Stonlux AT, with the appropriate primer, is suitable for application over concrete, wood or metal. Not recom­mended on asphalt, brick, quarry tile, mastic or painted surfaces. These must first be removed by mechanical means to expose the substrate prior to priming and overlayment.