Stonglaze VSC Product Data - Stonhard - #1

Percent Solids........................92%

Abrasion Resistance . . 0.08 gm max. weight loss (ASTM D-4060 Taber Abrader, CS-17 wheel 1,000 gm load, 1,000 cycles)

Impact Resistance ......... Exceeds 40 in. lbs.

(ASTM D-2794) (No cracking, crazing,

or loss of adhesion)

Pot Life.........20 to 25 minutes @ 70°F/21°C

Suggested Number of Coats.........Spray-1

Roller - 2

Minimum Dry Film Thickness..........10 mil/

635 microns

(@ 77°F/25°C) for tack-free surface

24 hours minimum

for normal operations Temperature Limitations...........140°F/60°C

(continuous exposure)

200 F/93 C

(intermittent exposure)

Fire Resistance of Dry Film ...........ClassA

(ASTME84).................Flamespread20

Smoke developed

Bond Strength.....................>400 psi

(ASTM D-7234) (100% concrete failure)

Hardness..........................80to85

(ASTM D-2240,Shore D)

V.O.C........................... 0.6 lbs./gal./

(ASTM D-2369) 72 g/l

Note: The above physical properties were measured in accordance with the referenced standards. Samples of the actual floor system, including binder and filler, were used as test specimens.

Stonglaze VSC is a two component, high perfor­mance, high solids, pigmented epoxy coating. It is for­mulated to provide long-term protection to vertical sur­faces with a single application. Stonglaze VSC cures to a hard, tile-like finish that exhibits excellent chemi­cal and abrasion resistance. Stonglaze VSC is an aesthetically pleasing and easy to clean wall coating.

Stonglaze VSC is specifically designed for use where a hard, smooth, tile-like finish is desired on a vertical surface. Stonglaze VSC is an ideal maintenance product for institutional and industrial facilities. Some typical wall applications for Stonglaze VSC include:

Medical facilities Educational facilities Pharmaceutical facilities Food processing facilities Animal holding areas Detention facilities

Stonglaze VSC, in conjunction with its appropriate primer, bonds firmly to concrete, masonry block, metal, and drywall surfaces. Drywall surfaces should have seams taped and spackled to a level 3 finish. Not recommended over mastics, painted surfaces, plaster, level 4 or 5 drywall finish, rust, or mill scale. These materials must be removed by mechanical means prior to application of Stonglaze VSC.

Stonplus AM9 is an antimicrobial, organic thione compound that acts as a permanent bacteriostat and fungistat against a broad range of gram-positive and gram-negative bacteria and fungi. Stonplus AM9 is EPA registered and contains no heavy metals.

• Excellent bond strength assures good adhesion to concrete, steel, drywall and masonry surfaces.

• Easily applied by brush, roller or spray application.

• Available in standard and custom colors.

Stonglaze VSC is packaged in units for easy

handling. Each unit consists of:

2 cartons each containing: 2 foil bags of Stonglaze VSC amine (2) 1 gallon cans of Stonglaze VSC resin

Durable glaze finish that is aesthetically pleasing and easy to clean.

• Long-term abrasion and chemical resistance.

• Stain resistant.