COVERAGE The coverage of Stonchem 341 is 32 sq. ft./gal at
40 mil/1 mm (20% loss included). STORAGE CONDITIONS Keep Stonchem 341 products tightly sealed in their
original containers until ready for use. Store at
50 to 85ËšF/10 to 29ËšC, out of direct sunlight. Properlystored, Stonchem 341 products have ashelf life ofone year. To ensure maximum film build, Stonchem
341 should be used within 3 months of the
manufacture date.Proper job site storage of Stonchem 341 is essentialto its performance. Follow these general procedures
for storage at the job site:Store components (amine and resin) unopened, in adry place at 50 to 85ËšF/10 to 29ËšC, out of direct
sunlight and protected from the elements. Keep away
from heat and flame.For the 24 to 48 hours just prior to use, narrow thestoragetemperature to 70 to 85ËšF/21 to 29ËšC tofacilitate ease of mixing.
Stonchem 341 Product Data - 12640 STONCHEM 341 PRODUCT DATA
PRODUCT ADVANTAGES ? High impact resistance? Superior adhesion to concrete
? Resistance to a broad range of chemicals
? Can be applied in a one-coat application up to60 mil/1.5 mm? Can be sprayed using single or plural componentairless equipment USES, APPLICATIONS • Chemical Storage Tanks
? Wastewater Clarifiers
? Plating Vats
? Equipment Supports
? Oil Storage Tanks
? Catwalks CHEMICALRESISTANCE PRODUCT DESCRIPTION Stonchem 341 is formulated to resist a broad range of
chemicals, such as fuels, salts, alkalis, and many
acids. COLORS PHYSICALCHARACTERISTICS Stonchem 341 is a 100% solids, flake filled, epoxy
coating designed for primary and secondary contain-
ment applications. This two-component system con-
sists of high performance
epoxy resin and an amine
curing agent. Stonchem 341 can be applied by plural
component or single component spray equipment at a
total thickness of 30 to 40 mil/750 to 1,000 microns in
a one-coat application. Stonchem 341 is offered in light gray and black.
Tensile Strength . . . . . . . . . . . . . . . . . . . .7,000 psi(ASTM D-638) PACKAGING FILM THICKNESS Stonchem 341 is supplied in pre-measured 5 gallon
units for application with single or plural component
spray equipment.
One unit consists of:(1) 1 gallon can of amine
(1) 5 gallon pail of resin Stonchem 341 is typically applied at 40 mil/1 mm in a
one-coat application.
Flexural Strength . . . . . . . . . . . . . . . . . . .10,800 psi(ASTM D-790) Flexural Modulus of Elasticity . . . . . . .5.9 psi x 10 6 (ASTM D-790) Hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75(ASTM D-2240, Shore D) Pot-life (@75ËšF/24ËšC) . . . . . . . . . . . . . .45 to 60 min. Cure Time (Approx.) Dry To Touch (@ 75ËšF/24ËšC) . . . . . . . . .12 hrsFirm (@ 75ËšF/24ËšC) . . . . . . . . . . . . . . .24 hrsChemical Service (@ 75ËšF/24ËšC) . . . .36 hrs Note: The above physical properties were measured inaccordance with the referenced standards. Samples of
the actual lining system, including binder and filler, wereused as test specimens
