| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Point® | | |
| | | Eclipse8 | | |
| | | valve communication and control | | |
| | | |
| | | |
| | | Sensing, Communication and Visual Indication | | |
| | | |
| | | DeviceNet VCT (92) Configuration Closed) | | |
| | | The Eclipse offers incredible value and space efficiency. Communications, position sensing, power outputs and auxiliary inputs are sealed in the Eclipse function module. Select from Namur sensors, SSTswitching sensors, orAS-lnterface, DeviceNet, Modbus or Foundation Fieldbus communication terminals. All are fully solid state and sealed. (For more detailed information please see pages 28 through 34.) | | |
| | | (2) Discrete Inputs (Open & (2) Power Outputs (Solenoids) (1) 4-20 mA Auxiliary Input 4 Watts, Both Outputs Combined 24 VDC | | |
| | | |
| | | Outputs, Max. Power Outputs, Voltage | | |
| | | |
| | | |
| | | Bus Powered Foundation Fieldbus VCT (93) | | |
| | | 1 | | |
| | | |
| | | Configuration | | (2) Discrete Inputs, Dl (Open & Closed) (2) Discrete Outputs, DO (Piezo Valves) 2mA @ 6.5 VDC each; Current Limited to 2mA (Bus Powered) Stores Number of Actuations Stores Date of Last Service Predetermined Output Fail State | | |
| | | |
| | | |
| | | Outputs | | |
| | | |
| | | |
| | | Other Features | | |
| | | |
| | | DeviceNet | | |
| | | |
| | | |
| | | Externally Powered Foundation Fieldbus VCT (94) | | |
| | | SST Switching Sensors (33) | | |
| | | |
| | | Configuration | | (2) SST Switching Sensors (2) Wire Terminations for one Solenoid Select either NO or NC Models 2.0 Amps 0.3 Amps 2.0 mA 0.5 mA 8 to 125VDC /24to125VAC 7.0Volts @100mA | | |
| | | |
| | | Configuration | | (2) Discrete Inputs, Dl (Open & Closed) (2) Power Outputs, DO (Solenoids) 4 watts @ 24VDC Both Outputs Combined; Current Limited to 200mA (Externally Powered) Stores Number of Actuations Stores Date of Last Service Pre-determined Output Fail State | | |
| | | |
| | | |
| | | Output Maximum Current Inrush Continuous Min. On Current Max. Leakage Current Voltage Range Max. Voltage Drop Namur Sensors (44) | | |
| | | Outputs | | |
| | | |
| | | Other Features | | |
| | | |
| | | |
| | | |
| | | Modbus VCT (95) Configuration | | |
| | | (2) Discrete Inputs (Open and Closed) (2) Power Outputs (Solenoids) (1) 4-20mA Auxiliary Input 4 watts @ 24 VDC Both Outputs Combined (Current Limited to 200mA) 32 Pre-determined Output Fail State | | |
| | | |
| | | Configuration | | (2) NAMURSensors (2) Wire Terminations for one Solenoid Conforms to DIN 19234 Target On <1.0 mA Target Off >3.0 mA 6 to 29 VDC | | |
| | | |
| | | |
| | | Output Current Ratings Voltage Range | | |
| | | Outputs | | |
| | | |
| | | Devices per Network Other Features | | |
| | | |
| | | |
| | | AS-Interface VCT (96) | | |
| | | |
| | | |
| | | |
| | | Configuration | | (2) Sensor Inputs (2) Auxiliary Inputs (2) Power Outputs (Solenoids) 160mA, Both Outputs Combined (Current Limited to 200mA) 4 Watts, Both Outputs Combined 25 to 30 VDC | | |
| | | |
| | | Max. Current Outputs, Max. Power Outputs, Voltage | | |
| | | |
| | | |
| | | AS-Interface VCT (97) with Extended Addressing | | |
| | | |
| | | Configuration | | (2) Sensor Inputs (2) Auxiliary Discrete Inputs (1) PowerOutput (Solenoid) 100mA 2.4 Watts 25 to 30 VDC | | |
| | | |
| | | Max. Current Outputs, Max. Power Outputs, Voltage | | |
| | | |
| | | |
| | | EN features a removable, fully sealed dual module to facilitate quick, convenient maintenance and wiring. | | |
| | | |
| | | StoneL Corporation Phone: (218) 739-5774 • Toll-free: (800) 843-7866 • Website: www.stonel.com 11 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |