Semiconductor solutions for healthcare applications
12Pages

{{requestButtons}}

Catalog excerpts

Semiconductor solutions for healthcare applications - 1

Semiconductor solutions for healthcare applications

Open the catalog to page 1
Semiconductor solutions for healthcare applications - 2

At STMicroelectronics, we have developed our healthcare product and service portfolio based on long-term research. We are involved in government-funded programs, collaborate with international universities and are a member of acknowledged healthcare consortia, such as the Continua Health Alliance. Healthcare market segments and application examples Portable, telehealth monitoring Wellness, fitness, assisted living Clinical, diagnostics and therapy Blood pressure monitors Temperature meters Blood glucose meters Blood oximeters Hearing aids Portable ECG Pedometers Heart rate monitors Fall...

Open the catalog to page 2
Semiconductor solutions for healthcare applications - 3

Featured products HMx011 Integrated diagnostic-quality bio-potential acquisition IC with 1, 2 or 3 differential channels The HMx01D devices are fully integrated, diagnostic-quality bio-potential acquisition systems with 1, 2 or 3 differential channels. A fully-integrated high-pass filter removes the half-cell DC value so the channels work with the AC component only. Each channel provides high resolution and low-noise conversion of bio-potential signals up to 10 kHz. The input connection circuit matrix guarantees maximum flexibility in terms of electrodes, cables and connectors. The D...

Open the catalog to page 3
Semiconductor solutions for healthcare applications - 4

STHV748 Integrated high-performance ultrasound pulse controller The STHV748 is a quad, high-voltage fully-monolithic pulser IC mainly intended for medical ultrasound imaging applications. An ultrasound imaging system transmits ultrasound waveforms generated from a piezoelectric transducer. As soon as the transmission ends, the same transducer is then switched to receive mode and the echoes, are then converted into lowvoltage signals. These signals are further conditioned, followed by post processing, to give the final image. The STHV748 correctly drives the piezoelectric transducer during...

Open the catalog to page 4
Semiconductor solutions for healthcare applications - 5

8/32‑bit ultra‑low‑power MCUs STMicroelectronics’ ultra‑low‑power portfolio includes a full range of 8‑bit and 32‑bit MCUs. It addresses most healthcare applications requiring reduced current consumption, from ultra‑simple, cost‑optimized feature needs to complex, high‑performance requirements. Platform for 8‑bit STM8L and 32‑bit STM32L MCUs ST’s 130 nm ultra‑low‑leakage process technology – speed and power consumption are independent of MCU power supply Ultra‑low voltage supply: 1.65 to 3.6 V 8-bit MCU: up to 16 MIPS at 16 MHz 2 to 64 Kbytes of embedded Flash, up to 4 Kbytes of SRAM and up...

Open the catalog to page 5
Semiconductor solutions for healthcare applications - 6

INEMO-M1 The smallest 9-axis inertial system of the iNEMO® SoB family INEMO-M1 is the first member of the iNEMO system on board (SoB) family. It integrates multiple sensors with a powerful computational core and provides reliable, drift-free 3D orientation estimation (roll, pitch and yaw, quaternions, rotation matrix), as well as sensor data. This 9 degrees-of-freedom inertial system represents a fully integrated solution that can be used in numerous applications such as virtual reality, augmented reality, image stabilization, human machine interfaces, robotics and inertial body tracking. A...

Open the catalog to page 6
Semiconductor solutions for healthcare applications - 7

MP34DT01 High-performance, low-power digital MEMS microphone with 63 dB SNR The MP34DT01 is an ultra-compact, low-power, omnidirectional, digital MEMS microphone built with a capacitive sensing element and an IC interface. The sensing element that detects the acoustic waves is manufactured using a special silicon micromachining process dedicated to produce audio sensors. The IC interface is manufactured using a CMOS process so that a dedicated circuit may be designed to provide a digital signal externally in PDM format. The MP34DT01 has an acoustic overload point of 120 dBSPL with a 63 dB...

Open the catalog to page 7
Semiconductor solutions for healthcare applications - 8

M24LR16E and M24LR64E Dual Interface EEPROM The M24LR16E and M24LR64E feature both an I2C and an RF interface, and so provide the flexibility to remotely program or update electronic products anytime during their lifetime and anywhere in the supply chain. RFID and NFC compatible, they are used to read measurements from portable healthcare applications and update the configuration data of clinical devices without powering on the device. They also feature an innovative energy harvesting function which can enable battery-less designs or greatly improve battery lifetime. interface 1.8 to 5.5 V...

Open the catalog to page 8
Semiconductor solutions for healthcare applications - 9

EMI filtering and signal conditioning Integrated EMI filtering and ESD protection: QQ EMIF1: Strong attenuation of 900 MHz and higher frequencies for different sockets including keypads and touch pads, memory cards, audio lines ECMF1: High-performance common-mode noise filtering with integrated ESD protection for high-speed serial interfaces for display and camera/imaging systems with serial interfaces, High Speed USB 2.0 IPD for RF front-end: integrated passive device (IPD) solutions based on glass substrate can offer a low parasitic and high-Q solution suitable for RF applications...

Open the catalog to page 9
Semiconductor solutions for healthcare applications - 10

Microcontrollers Ultra-low-power 8-bit MCUs, 1.65 to 3.6 V, up to 6 MIPS, 2 to 64 Kbytes Ultra-low-power 32-bit MCUs, 1.65 to 3.6 V, up to 33 DMIPS, 32 to 384 Kbytes 32-bit MCUs, 1.7 to 3.6 V, up to 68 DMIPS, 16 Kbytes to 1 Mbyte 32-bit MPU based on ARM926EJ-S™ core with up to 400 DMIPS Dual Interface EEPROM 16-Kbit Dual Interface EEPROM with password protection, energy harvesting and RF status functions 64-Kbit Dual Interface EEPROM with password protection MEMS and sensors Digital-output motion sensors, low-power and high-performance 3-axis accelerometer MEMS digital-output motion sensor,...

Open the catalog to page 10
Semiconductor solutions for healthcare applications - 11

Amplifiers and comparators Micropower op-amps, 180 µA/1.3 MHz with shutdown Standard low-power op-amps, 400 µA/5.5 MHz with shutdown Micropower low-voltage rail-to-rail comparators Low-cost, low-power rail-to-rail input/output op-amps Rail-to-rail 1.8 V high-speed micropower comparators Rail-to-rail high-speed comparator Rail-to-rail input/output CMOS op-amps Power management White LED driver/backlighting White LED driver/backlighting Driver/backlighting White LED driver/backlighting Lithium battery charger USB compatible lithium battery charger Dual input Li-ion battery charger with gas...

Open the catalog to page 11

All STMicroelectronics catalogs and technical brochures

  1. STGW30NC60KD

    14 Pages

  2. HD1750FX

    8 Pages

  3. TDA75610SLV

    42 Pages

  4. TDA7391

    13 Pages

  5. TDA7376B

    15 Pages

  6. TDA7375V

    15 Pages

  7. TDA2005

    25 Pages

  8. L4925

    14 Pages

  9. FDA903U

    80 Pages

  10. FDA803U

    76 Pages

  11. FDA903D

    82 Pages

  12. FDA803D

    78 Pages

  13. BALF-SPI2-02D3

    13 Pages

  14. LIS2DTW12

    65 Pages

  15. VL53L0X

    40 Pages

  16. LPS22HH

    59 Pages

  17. M40SZ100W

    20 Pages

  18. A1C15S12M3

    17 Pages

  19. TSX923

    32 Pages

  20. TS1851

    24 Pages

  21. LMV321

    17 Pages

  22. TDA2003LG

    8 Pages

Archived catalogs

  1. NEATSwitch

    6 Pages