Radio receiver

//

Series WAGO 789

Features/options - Thermoplastic enclosure - EnOcean standard - 4-channel: potential-free relay outputs- 4 NO contacts, max. 16 A, 4 change-over contacts, max. 8 A- Transmitter/receiver assignment by teaching mode- LEDs for indication of switching state- 868 MHz frequency band- 70 mm enclosure- SMA plug-in connector for external antenna

//

WAGO 789 Technical Data

Standards IEC 60068-2-6; IEC 60068-2-27 Number of channels 4 Mounting DIN rail mounting Screw terminals terminals with CAGE CLAMP WAGO Series 236: 0.08 ... 2.5mm
2 AWG 28–14(incl. conductor ferrules) Protection class IP 20 per IEC 60529 Protocol EnOcean Ambienttemperature –0 °C … +55 ºC Storage and shippingtemperature –25 °C … +85 ºC Switching frequency max. 9000 telegrams at repetitions/h Operating voltage Ue 24VDC -15 % … +20 % Operating current Ie max. 0.1A Inputs radio, max. 4 industrial transmitters
10 Outputs 4 relay outputs: type depending4 NO contacts: 13-14 , 23-24, 33-34, 43-44 4 change-over contacts: 11-12/14 , 21-22/24, 31-32/34, 41-42/44 Load current/channel 4 NO: 16A; 4 change-over: 8A Display green LED for control voltage, display of switching conditions EMC rating per EMC Dirctive Degree of pollution 2 per DINVDE 0110 Vibration/shock resistance per IEC 60068-2-6 and IEC 600068-2-27 External antenna always required for optimum sensing range Note inductive loads (contactors, relays etc.) areto be suppressed by suitable circuitry.
Arrangement of receiver and switch antenna Ordering detailsWAGO 789-601
Optimum mountingPossible mountingUnsuitable mounting 4 NO contacts, -602: 4 change-over contacts Series RF magnet antenna with SMA plug-in connector available as accessory, Art-No. 01.08.0254.Mobile field strength indicator EPM 100 for radio field planning isavailable, Art-No. 01.08.0267.
Note The antenna must be mounted on a metal plate of min.250 x 250 mm size.