Solenoid valves , Proportional controllers , Soft start controllers , Powersaver XPRO804 - Sterling Hydraulics - (Version JPG) - PDF Catalogue | Technical Documentation

E L E C T R O N I

C O N T R O L L E R

XPRO804

POWER SAVER

CONTROLLER

12 & 24 VOLT, PWM

■ Reduced power consumption and heat génération.

■ Self-contained DIN 'Plug top'.

■ High impact resistant moulded ABS

■ Supplied with approximately 1 metre of two colour coded cable.

OPERATION

The 804 is a power saver plug top PWM controller used for reducing the current consumption of a standard on/off valve. The plug will deliver full voltage to the valve for 50mS then drop down to a holding voltage of 30% of the applied voltage. This can be used where multiple valves are used and power consumption is a consideration. It can simply be used in place of a standard DIN connector.

VOLTAGE APPLIED TO COIL

SPECIFICATIONS




		\



	BASIC MODEL NUMBER	XPRO804
	VOLTAGE	12 or 24V DC
	MAX POWER	36W
	(IP) RATING	IP 65
	MAX CURRENT	3.0A
	COIL RESISTANCE	4.5 - 30 ohms
	CURRENT REDUCTION	30% of MAX

100 150

Time, milliseconds

200

250

APPLICATION

■ For use with most on/off valves.GO & GS series valves.

* IMPORTANT: See pages 582-583 for additional notes on operating conditions. Specifications may change without notice

224

Solenoid valves , Proportional controllers , Soft start controllers , Powersaver XPRO804 - Sterling Hydraulics - #1

Solenoid valve, Flow control valve, Relief valve, Hydraulic valve, Hydraulic check valve