Catalogue - Simultaneous energy connection. - STÄUBLI - (Version JPG)

See other catalogues for STÄUBLI

Hydraulic coupling, Stainless steel coupling, Robot tool changer, Magnetic clamping, Quick coupling

Text version of the page

s ■

0 6 mm


	Number	Rated	Cable cross	Rated	Type of contact	Part numbers
Electricity	of	current	section	voltage		modules fitted
	contacts	A	mm²	V		with silver plated 0


	socket	ECT 160 02 1006
	pin	ECT 160 02 6006
	socket	ECT 160 02 1010

600

ECT 160 02 6010


			socket	ECT 160 01 1016/GND
	1	16
w- 12V	1	16
			pin	ECT 160 01 6016/GND

0 8 mm


	Number	Rated	Cable cross	Rated	Type of contact	Part numbers	Part numbers
Electricity	of	current	section	voltage		modules fitted	modules fitted
	contacts	A	mm²	V		with silver plated •	with gold plated •


	80	10	600	socket	ECT 180 02 1010	ECT 180 02 1010/D
	80	10	600	pin	ECT 180 02 6010	ECT 180 02 6010/D
2	100	16	600	socket	ECT 180 02 1016	ECT 180 02 1016/D
2	100	16	600	pin	ECT 180 02 6016	ECT 180 02 6016/D
	125	25	600	socket	ECT 180 02 1025	ECT 180 02 6025/D
	125	25	600	pin	ECT 180 02 6025	ECT 180 02 6025/D
				socket	ECT 180 01 1025/GND
1		25
1		25	-	pin	ECT 180 01 6025/GND

All electrical contacts on the CombiTac modules have to be crimped.

The values given correspond with the operating conditions below:

• rated voltage: phase / earth AC DC, pollution level 2 and overvoltage category II, conformity with

IEC 60664-1

(additional data on page 19)

• Rated current maximum cable cross section and 20°C working temperature (for other temperatures and cable cross sections, refer to the derating diagrams on page 18)

Recommendations:

• connection and disconnection off-load.

• i n accordance with the IEC/TR 61201 standard, the extra low voltages are 33 Vac and 70 Vdc.

For any application with higher voltages, extra protection measures must be taken (protective shields, circuit breakers, etc).

For all other operating conditions, contact your Stàubli specialist.

For solutions with modules fitted with electrical contacts next to modules fitted with cooling

couplings, it is imperative

to regularly check the good state and functionning of products and to replace them if necessary.

STÀUBLI 9

Simultaneous energy connection. - STÄUBLI - #9

Hydraulic coupling, Stainless steel coupling, Robot tool changer, Magnetic clamping, Quick coupling