You may also be interested in
Dust collector, Magnetic field measuring device, Air knife, Electrostatic charging bar, Measuring device
Text version of the page
ISntadticuBsotnrdial StaticControls ® SB-30A
Electrostatic Charging Power Supply
Technical Information and Specification
The SB-30A is a state-of-the-art 150W 30kV DC power supply designed to
temporarily bond materials together using electrostatic charging applicators.
The programmable output of the supply ranges from zero to
greater than full-scale rating (30kV potential and 5.0mA current).
The SB-30A local console provides a simple, reliable user
interface for manual operation. A remote console is available
for manual operation when the power supply is situated
in an inconvenient or inaccessible location.
The remote console, on/off footswitch and other accessories
can be connected to the SB-30A Remote-Manual
port. The SB-30A also features an electronic interface for fullyautomated
operation with a PLC or similar equipment connected to the
Remote-Auto port. Both ports can be wired using industry-standard DB-25 cables.
The SB-30A output can be programmed for either constant-voltage (CV) or constant-current (CC) mode.
Features
• Reversible local-console orientation (factory option) for either table or wall mounting
• Flat-panel console with membrane-switch commands, LED display and key-switch lockout
• Two full-function I/O ports for manual and automated remote operation
• Output protection for short-circuit, open-circuit and arc-over load conditions
• Input protection for under-voltage and over-voltage line conditions
• Thermal protection with over-temperature shutdown and fan-failure alert
• Large, bright voltage/current-meter with signed 3-digit LED display
• Self-mounting/stacking chassis provides top and bottom attachment without separate brackets
• Four-port output compatible with most major-brand charging applicators
• Both negative and positive charging polarities, and stackable bipolar combo supply, available
• Front-panel key-switch/indicator and rear-panel configuration switches for automated operating mode
Static Clean International • 15 Adams St., Burlington, MA 01803
Tel: 781-229-7799 Fax: 781-229-4555 • www.staticclean.com
In Mold Decorating • Bagmaking • Shrink Packaging • Interleaving • Roll Changeover • Dry Bonding Lamination
|
|