Particle Trap 3000 - Static Clean International - #1

Text version of the page

StaticControls Particle Trap 3000 Parts Cleaning System Technical Information and Specification What is the Particle Trap 3000 The Particle Trap 3000 is a stainless steel source capture tool that solves a major problem related to blowing off particles in the manufacturing and cleanroom environments. Why use the PT3000 When trying to dislodge particles from various substrates, especially plastic parts and trays, the use of ionizing air guns, ionizing nozzles and airknives are commonly used devices that not only aid in getting the contaminants off the product, but the fact that they control the static electricity means that the particles are not re-attracted to the newly cleaned materials. Where do the particles go? The problem is that they either fall to the floor, onto a workstation or to personnel, which means that they stay around and could eventually be the cause of rejects and poor yields. The problem is solved by using a blow-off device in front of the Particle Trap which utilizes a reverse fan that pulls ambient air into the cabinet that is supported by a pre-filter and hepa-filter system, so that the exit air is free of unwanted contaminants. The quick change pre-filter makes the Particle Trap 3000 the ideal system to enhance the process and increase yields that translate into higher profits. Although the systems works best when incorporating an ionized air device to neutralize static electricity, as a stand alone process tool, the PT3000 can also be positioned near a critical point in the process. The PT3000 will act as a vacuum to attract particle into the filters of the unit and away from particle-sensitive products typically found in Medical Device Manufacturing, Optics, Coatings, Electronics and other applications that require clean parts. Optional If you wish to convert the PT3000 to an Ionized Air Cleaning System, simply mount one of our Ionizing Air Knives to the front of the PT3000 above the entrance or use an Ionizing Air Gun and perform the cleaning action in front of the opening. Specifications: Particle Trap 3000 Exterior Cleaning Chamber Width 18.19” 17.19” Height 19.25” 17.50” Depth 23.71” 10” Weight approximately 50 lbs Max. Current 3 amps Input Power 115 VAC 50/60Hz dba 71 cfm variable up to 500 1/07 Static Clean International • 15 Adams St., Burlington, MA 01803 Tel: 781-229-7799 Fax: 781-229-4555 • www.staticclean.com