See other catalogues for
STANLEY
You may also be interested in
Text version of the page
Untitled
table.main {}
tr.row {}
td.cell {}
div.block {}
div.paragraph {}
.font0 { font:5.00pt "Lucida Sans Unicode", sans-serif; }
.font1 { font:6.00pt "Lucida Sans Unicode", sans-serif; }
.font2 { font:9.00pt "Lucida Sans Unicode", sans-serif; }
STEERING WHEEL PULLER
• Any steering wheel that is tapped to take cap screws can be easily removed with this Steering Wheel Puller, for removing flanges, pulleys, etc.
• For use over a hollow shaft, a nipple is supplied to provide a base for the screw.
• Also includes adapters for Buick® and Chrysler® products (not shown.)
Item No.
Weight
ET-1328A
2.25 lbs.
Buick» is a registered trademark of General Motors Corporation. Chrysler* is a registered trademark of Daimler Chrysler Corporation.
HARMONIC BALANCER PULLER
• Designed for use on balancers, vibration dampers, pulleys or any gear with tapped holes.
• The four slots in the yoke allow the use of this tool in either 2 or 3-hole applications.
• The floating swivel prevents damage to shaft ends.
• Included are the necessary side screws —
(3) 3/8" x 24 x 2"; (3) 5/16" x 18 x 2"; (2) 3/8" x 16 x 4";
(3) M8 x 1.25 x 80 mm; (3) M10 x 1.50 x 50 mm (not shown).
Item No.
Weight
ET-1330
2.71 lbs.
172
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.
