Hydraulic Ground Rod Driver - Stanley Hydraulic Tools - #1

Text version of the page

Ground Rod Driver Features and Benefits SPECIFICATIONS 52567 4/02 Stanley Hydraulic Tools 3810 S.E. Naef Road Milwaukie, Oregon 97267 Tel 503•659•5660 Fax 503•652•1780 ITEM U.S.A. METRIC CAPACITY (GD50132RF) 1/2 and 5/8 in. Rod 12 and 16 mm Rod CAPACITY (GD50133) 3/4 and 1 in. Rod 19 and 25 mm Rod FLOW RANGE 5 - 9 gpm 19 - 34 lpm PRESSURE 1500 - 2000 psi 105 - 140 bar PORTS -8 SAE Straight Thread O-Ring SYSTEM TYPE Open Center/Closed Center WEIGHT 52 lbs 24 kg LENGTH 25.5 in. 64.8 mm CONNECTION 3/8 in. Flush-Face Quick Disconnect Couplers HOSE WHIPS Yes GD50 The Stanley GD50 Ground Rod Driver provides a competitive means of driving rods with proven, hard-hitting technology. Two models are available, the GD50132RF that drives 1/2-inch and 5/8-inch rods the GD50133 that drives 3/4-inch and 1-inch rods. The lifting eye allows the operator to suspend the driver above the rod with ease. The long side handles give the operator control during the driving process. The in-line valve in the 8-foot hose whips gives the operator On/Off control where he is standing. Both GD50 models have driving anvils which are designed to fit the rods which helps to minimize damage to the rod ends. The anvil which remains in contact with the rod while the hammer in the ground rod driver delivers its highenergy blows to the anvil. The deep socket of the anvil keeps the driver from jumping off the end of the rod. The anvils are interchangeable, so that you can change the capacity of a ground rod driver by simply changing anvils. The removal of two bolts is all that is required to service the front end of the GD50. GD50 shown minus hose whips, in-line valve and couplers