Acu-TracŪ Ultrasonic Level Sensors Family Overview - SSI Technologies - #1 |
|
You may also be interested in
Transmitter, Absolute pressure sensor, Pressure sensor, Level sensor, Sensor
Text version of the page
SSI Technologies - Application Note AT-AN1 Acu-TracŪ Ultrasonic Fluid Level Sensors Product OverviewProduct DescriptionThe Acu-TracŪ family of ultrasonic fluid level sensor is non-contact fluid level sensors that are a direct replacement for level senders on tanks with depths up to 3.0 m. The ultrasonic fluid level sensor provides a choice of either analog current loop (4-20 mA) or voltage outputs (ratiometric or non-ratiometric) with the additional capability of processing real time fuel data and messaging on a J1708 data link.Product FeaturesMore Accurate: 2% of tank volume. More Reliable: Acu-TracŪ is non-contacting. Resistive float sender have a wiper that slides across a resistive strip that with time can wear and cause intermittent or complete loss of the signal. Non-Invasive: Acu-TracŪ mounts to the same opening as the resistive float sender, but does not protrude into the tank. Easier to Install: Acu-TracŪ has no components to protrude into the tank. Digital Filtering: User programmable time constant in digital filtering eliminates errors due to fluids sloshing in mobile tanks. Real Time Fuel Data: Real time fuel data over the J1708 data link for both on vehicle and off vehicle communication. Remote, Real Time, Automated Fuel Data Reporting: Works with mobile communication systems to reduce operating costs and improve fuel efficiency in the following applications: 1) Fuel Purchase Optimization 2) Low Fuel Warnings to Prevent Running Out of Fuel 3) Fuel Fraud Detection 4) Fuel Tax Odometer Support 5) Fuel Tax Idle Fuel Rebates 6) Fuel Usage Report containing Tank MPG and Idle Fuel Tank Profiling: User programmable strapping tables for unique tank shapes. Chemical compatibility: Acu-TracŪ works with a wide variety of media including diesel, motor oil, hydraulic fluid and black water. Self Test/Diagnostics: Power Up Test verifies sensor is operating properly and diagnostic messages are sent over the RS-485 bus. NEMA and CE Mark Class B RatingsSSI TECHNOLOGIES, INC. Copyright March 14, 2007 SSI Technologies Inc. All Rights Reserved Controls Division 2643 West Court St. Janesville, WI 53548-5011 Phone: (608)758-1500 Fax: (608)758-2491 SSI Technologies, Inc. Revision 1 1 |
|