See other catalogues for Squid Ink Manufacturing

Inkjet marking machine, Marking printer, Case sealer, Marking machine, Ink

Text version of the page

VECTOR XII

MODULAR PRINTING SYSTEM

Vector XII System Components

•Controller cabinet•Ink delivery system •Up to 6 printheads and printhead mounting brackets •Printhead data cables and ink line kits•Photocell product sensor and photocell mounting bracket•Industrial-strength hand-held input device

Vector XII utilizes water-based or solvent-based inks for printing on awide range of porous and non-porous surfaces.

Vector XII System Specifications

Operating Features - Dot size, print delay, character width,character boldness, photocell on/off/repeat/encoder input, invertprint, reverse print, purge routine Print Type - Large character dot matrix ink jet printing system Printhead Options - Users have the option to use up to:•Six V-1600 Series Printheads, or•Six V-1600HD Series Printheads Encoder Output - Resident software allows communication withshaft encoder

Users can run up to 12lines of print from asingle controller.

Component Modularity - Eliminates the need for costly servicecalls and minimizes downtime; printheads and components canbe replaced in less than 5 minutes Character Sizes - V -1600 Series Printheads (16-channel dot matrix characters) •1.75 (4.45cm) at 100% 16 dot height, 0.70 (1.77cm) at 40%7 dot height, or 0.46 (1.16cm) at 26% 5 dot height withsplit-line capability to print two lines of text•1.0 Printhead Dimensions - 2.5 (6.4cm) H x 1.5 (3.8cm) W x 7 (17.8cm) L; dimensions are for the printhead only—an additional3 (2.54cm) at 100% 16 dot height, 0.40 (1.01cm) at 40%7 dot height, or 0.27 (7.6cm) is needed for the ink line and printhead cabling (0.68cm) at 26% 5 dot height withsplit-line capability to print two lines of text Product Sensor - Diffuse beam photocell (20v) or hardwaresinking signal, other photocell options available upon request V -1600HD Series Printheads (32-channel hi-definition characters) Electrical Requirements - 90 - 240 VAC, 50/60Hz, 8 amp •1.75 (4.45cm) at 100% 16 dot height, 0.70 (1.77cm) at 40%7 dot height, or 0.46 (1.16cm) at 26% 5 dot height withsplit-line capability to print two lines of text Cabinet Construction - Industrial-gauge-coated steel Operating Environment - 30°F (0°C) to 122°F (50°C) Character Set - 61 character ASCII set Substrate Capabilities - Porous or non-porous substrate printingcapability, specify at time of order Print Speed - 20 feet/minute (6.1m/minute) to 300 feet/minute(91.44m/minute) line speed depending on message length Ink Volume - 5-gallon (18.93 liter) pail or 17-gallon (64.35 liter)returnable container Message Length - 128-character length per message per boardpack; 128 memory locations

Versatile controllerdesign allows users toupgrade or replace PCboards within minutes.

Communication - RS-232C, 9600 baud, 8 data bits, 1 start,1 stop, asynch Software Features - Counter, lot counter, 24-hour clock, 8-or 12-hour programmable shift code, Julian date, 3-letter month name, 3-letter weekday name, expiration date, expiration month,expiration day, expiration year, expiration Julian date

Vector XII Optional Accessories

Spare Parts Kit - Includes spare printhead, board assembly, data cable, ink line kit and master cap Starter Kit - Includes ink, cleaner for flushing the system, spray bottle for cleaner, hand cleaner, printhead wipes and 70mm cap wrench PC Software - Communications software for PC integration Shaft Encoder - Allows operation with variable-speed conveying systems Bar Code Laser Scanner - Allows scan and print message retrieval Low Ink Light Beacon - Beacon notifies users of low-ink situations Turbo-Dri Drying System - Facilitates quick drying on non-porous surfaces Floor Stand - Includes mounting bracket and legs with leveling feet, 57 (1.5m) total height

Vector XII ink deliverysystem allows printingwith water-based orsolvent-based ink.

Installation and Training - On-site installation and training available

Vector XII Ink Jet Printer - Squid Ink Manufacturing - #2