Catalogs >
SPIROL >
Series 2000 Series 2000

Series 2000 Series 2000
4Pages

Catalog excerpts

The Leading Edge of Drive Technology The combination of Frequency, Amplitude and Phase “ rol places the SPIROL Series 2000 Vibratory Drives ahead of conventional feed systems. Series 2000 Features: - Two independent axis of motion, horizontal and vertical, which allows: • Independent horizontal and vertical amplitude control • Full phase control of the timing of the vertical and horizontal axis of motion - Automatic load compensation - Applies the appropriate system vibrating frequency independent of the main power frequency - Digital controls with touch screen Human Machine Interface -...

Open the catalog to page 2

Graph A shows a typical response of the amplitude of vibration of conventional drives as the natural frequency of the system varies. Accordingly, the natural resonant frequency must be tuned at or near the frequency of the power source. This is achieved by changing the mass of the bowl or the stiffness of the springs or both. With conventional systems, as the product mass in the bowl changes and as the springs relax from use, the performance of the feeder is adversly affected. The SPIROL variable angle vibratory drive automatically senses the natural resonant frequency of the feeding...

Open the catalog to page 3

Application Engineering Application: An assembler wanted to automatically feed and orient synthetic corks at a feed rate of 200 parts per minute. These corks are very difficult to feed due to the sticky film that remains on the surface after the manufacturing process. Other challenges included noise levels and part orientation. A conventional feed system would not meet the assembler's performance requirements. Solution: SPIROL Engineering recommended an 18" Series 2000 drive unit with a dual axis controller and a 24" fabricated stainless steel, dual discharge bowl. External bowl tooling in...

Open the catalog to page 4

Series 2000 Series 2000 4Pages

Catalog excerpts

All SPIROL catalogs and technical brochures

Series 2000 Series 2000
4Pages