| | | | | | | | |
| | | |
| | DiniGnSiOnS (approximate in millimetres) | |
| | | |
| | Withdrawaldistance Gi Integral lifting eye 15 mm diameter | |
| | | |
| | | | |
| | | | | |
| | | |
| | | | |
| | | |
| | | |
| | *Weights inclusive of check valves and flanges | |
| | | |
| | Typical specification The pump shall be a Spirax Sarco automatic pump type MFP14 operated by steam, compressed air or other pressurised gas to 13.8 bar g. No electrical energy shall be required. Body construction of SG iron (EN-GJS-400-18-LT) with disc type check valves for pumping liquids of specific gravity of 0.8 and above. The pump shall contain a float operated stainless steel snap-action mechanism with no external seals or packing. When required, it should be fitted with a custom insulation jacket for maximum energy saving and a cycle counter to enable the volume of pumped liquid to be calculated. | |
| | | |
| | Some of the products may not be available in certain markets. | |
| | | |
| | Spirax-Sarco Limited, Charlton House, Cheltenham, Gloucestershire, GL53 8ER UK. Tel: +44 (0)1242 521361 Fax: +44 (0)1242 573342 E-mail: Enquiries@SpiraxSarco.com Internet: www.SpiraxSarco.com © Copyright 2008 Spirax Sarco is a registered trademark of Spirax-Sarco Limited | |
| | | |
| | | | |
| | | |
| | | |
| | | | | | | | |